1st floor: gut most of it. Move kitchen (install 2 new windows and exterior door). Create master suite, den, powder room, and new front entry hall. 2nd floor: new floor in kitchen. Block-off back hall bathroom bedrooms from rest of 2nd floor and make part of 1st floor unit. Create 1 bathroom for 1st floor owners unit and 1 bathroom for 2nd 3rd floor rental unit. 3rd floor: install new vanity, toilet, and window in bathroom general: demo two existing chimneys, install new heating cooling system. Insulate all affected areas with closed cell foam insulation: r38 ceilings, r21 walls, r floors.

1. At the main upper shingle roof, and six shingle dormer roof sections - strip and remove existing shingles & flashings down to wood deck substrate. Front lower roofs not included. 2. Replace any damaged or rotted wood deck. Re-secure any loose deck boards. Install new 8 white aluminum drip edge at all outside perimeters. 3. Install 100% ice & water shield coverage, and on the dormers. 4. Strip and remove the existing slates above the dormers to properly flash the mansard walls above them, tying into the roofing. Replace slates in the same configuration. 5. Install new lifetime architectural-style shingles. Re-flash 1 vent pipe, 1 skylight, and 1 chimney, including new step flashings and new lead counterflashing. 6. Clean and remove all debris caused by the above work from the property.