Remove iron bars from the first floor windows and above alley gate on the burgundy sideremove barbed wire on the dauphine siderepair, repoint brick and mortar where necessary using bricks that match existing and vcc approved mortar (attached)repair, paint, install wood balcony decking, fascia, undersiderepair, paint, install wooden louvered shutters to match existingto prepare for painting by washing using a low water pressure (4 psi max); sanding (rotary sanders cannot be used), making minor millwork and masonry repairs as necessary to match existing conditions (masonry mix must be soft, with maximum portland cement content not to exceed 1 part to 12) and to paint as follows to match existing conditions: wooden elements including, windows, frames, lintels, shop windows, fascia soffit outriggers of gallery... White off-white, semiglossfront doordark green,semiglossshuttersdark green,semiglossironwork... Black, glossin response to a violation

Bag and dispose of all existing asbestos tiles. Install storm gaurd membras as entire underlaymentinstall the aquahide synthetic underlayment as entire underlaymentinstall gray green vermont slate 12"x18" (semi-weathering) secured with copper nails. Fabricate and install custom 16 oz copper step flashing along all parapet wallsfabricate and install custom 16 oz copper riglet flashing to properly counter flash step flashing cut into parapet wall. Fabricate and install custom 16 oz copper apron flashingfabricate and install 16 oz copper drip edge along all perimeterinstall new jacks and flangesremove and reset the exisint "v" tilesfabricate and install a new 16 oz copper internal gutter inside of the upper roof parapet wallsform mortar bed on all parapet walls accordin to vcc specificaitons (see attached)metal cap-flashing on the parapets is not allowednote: trash chutes are required for removal of debris from all roofs all work must conform to standard vcc policies & guidelines permit do

Roofing