Remove deteriorated floor boards, stringers, and fascia boards. Install new 3"x4" beaded stringers, 5/4x4 t&g floorboards, and 7/8" fascia with " bead, all as per vcc standard detail sheet no. 12 (attached). All repair/replacement work shall match existing in color, size, material, detail, profile and exposure

-repoint masonry joints rear of service-building wall as needed with vcc approved mortar below:mortar: no more than 1 part portland cement, 3 parts lime, 9 parts sand, and enough water to form a workable mix. Prepackaged mixes are not permitted, as quality control is not consistent.

Remove deteriorated floor boards, stringers, and fascia boards install new 3"x4" beaded stringers, 5/4x4 s2s t&g floorboards, and 7/8" fascia with " bead, all as per vcc standard detail sheet no. 18 (attached) all repair/replacement work shall match existing in color, size, material, detail, profile and exposure

Historical import type: enforcement vcc permit generaluser: tmcleodtracking: 8617841782status: permit issuedstatus date: 5/10/2012 12:00: amowner: hamilton george eowner address: 835 burgundy st, new orleans, la 70116owner edited by: 5/14/2012 by tmcleodto do the following work on front elevation per vcc guidelines:-repair/replace front-door molding to match existing.-repair/replace bottom rail of window to match other existing windows.-reglaze windows as needed.-repair shutter hardware to match existing.-paint gutter downspout to match wall color. General note: vcc recommends replacing louvered shutters on 2nd & 3rd story windows.

Repair 3rd story window. Not other work allowed under this permit.

Paint phone wores same as building, repair 3rd stoy window, paint phone wires same as door casing, change light on outside of building per vcc.

Repair n rampart elevation of the rear slave quarter building as follows: remove stucco area of approximately 2 wide by 12 tall to expose underlying crack repair replace underlying brick as necessary to match existing and utilizing vcc mortar mix stucco exposed brick using vcc stucco recipe all repair replacement work shall match existing in color, size, material, detail, profile and exposure. Failure to exactly match materials, details, profiles, exposures, or vcc mortar as specified in permit will result in a vcc violation and mandated repair of improper work.

Repair 3rd story window. Not other work allowed under this permit.

Paint phone wores same as building, repair 3rd stoy window, paint phone wires same as door casing, change light on outside of building per vcc.

Repair divider if owned by owner of building, replace door lock with keypad of older style per vcc.

Historical import type: enforcement vcc permit generaluser: tmcleodtracking: 8617841782status: permit issuedstatus date: 5 10 2012 12:00: amowner: hamilton george eowner address: 835 burgundy st, new orleans, la 70116owner edited by: 5 14 2012 by tmcleodto do the following work on front elevation per vcc guidelines:-repair replace front-door molding to match existing.-repair replace bottom rail of window to match other existing windows.-reglaze windows as needed.-repair shutter hardware to match existing.-paint gutter downspout to match wall color. General note: vcc recommends replacing louvered shutters on 2nd & 3rd story windows.

Repair divider if owned by owner of building, replace door lock with keypad of older style per vcc.

Remove deteriorated floor boards, stringers, and fascia boards. Install new 3"x4" beaded stringers, 5 4x4 t&g floorboards, and 7 8" fascia with " bead, all as per vcc standard detail sheet no. 12 (attached). All repair replacement work shall match existing in color, size, material, detail, profile and exposure

Remove deteriorated floor boards, stringers, and fascia boards install new 3"x4" beaded stringers, 5 4x4 s2s t&g floorboards, and 7 8" fascia with " bead, all as per vcc standard detail sheet no. 18 (attached) all repair replacement work shall match existing in color, size, material, detail, profile and exposure

To resolve ongoing vcc violations, cited in case #16-12037:repair damaged third story window, to match exisitng, using spanish cedar or mahogany. As needed, backprime and paint to match existing, semigloss. Remove non-functioning keypad and wiring. Secure remaining wiring tightly and discretely, and paint to match adjacent surface. Remove existing, unpermitted and or unshielded light fixturesinstall one (1) remcraft 1 fixture to the underside of the balcony, centered on the front entrance. All fixtures shall use lamps with the following criteria: 3000k color temperature, 80+ color rendering index, and 600--8 lumens per bulbrepair louvered wooden balcony divider, to match existing