To resolve vcc violations cited in case number 16-12366-vccnop, per attached materials stamped vcc approved 03 30 17, as follows:remove unshielded spotlight fixture from dumaine elevation,install two-light, wall mounted cylinder light (remcraft 21 series, approx. 3" diameter x 5 1 4" long, must not exceed 3" diameter x 7" long). Fixture must be set back at least 10-0" from front facade. Paint to match adjacent surface. Remove inactive wiring. Remaining wiring must be installed tightly and discretely, and painted to match adjacent surface to minimize visibility. Note: permit issued in response to violations. Work shall commence no less than days after permit is issued. Work must be completed no less than days after work begins. Owner will call vcc for final inspection upon completion of work. Penalty fees may apply because of improper or unauthorized work.