Remove all existing, unpermitted and/or unshielded light fixtures install three (3) remcraft 1 series light fixtures to the masonry wall centered over the second floor window openings fixtures shall be painted white to match adjacent building trim. All conduit and wiring shall be placed on the interior of the building. No conduit to be run across exterior of building. All fixtures shall use lamps with the following criteria: 3000k color temperature, 80+ color rendering index, and 800-12 lumens per bulb note: permit issued in response to violations. Work shall commence no less than days after permit is issued. Work must be completed no less than days after work begins. Owner will call vcc for final inspection upon completion of work. Penalty fees may apply because of improper or unauthorized work.

Remove existing outside down-light can fixtures and replace them with new vcc approved fixture to be installed over the (9) windows instead of the existing location between the windows.

Red painted doors on ground floor: all doors on ground floor to be painted with approved color sherwin williams fire weed, sw 6328. Any painted glass (on the exterior) is to be cleaned and painted black on the reverse side. Horizontal division at dropped ceiling to be painted door color. Exterior lighting: balcony level wall mounted contemporary down-light can fixtures to be removed. Wall mounted carriage lights to remain. Signage: old nawlins cookery sign to be removed. Excess signage mounted to inside of ground floor windows and doors to be removed. Window repairs: all missing muntins to be repaired to match existing. All plexiglas panels to be replaced with glass. Soffits & cornice: deteriorated soffits to be repaired and painted to match existing. Masonry: balcony level deteriorated masonry above headers to be properly repaired, using vcc approved mortar mix. Exterior paint: approved paint color for trim is sherwin williams sw94lrv78, cherish cream. All trim, including ground floor, is

Minor exterior work to address vcc violations

Work to address existing vcc violations, per materials stamped vcc approved 11 10 16, as follows:relocate existing dome security camera and install under balcony, paint housing to match adjacent surface. Remove exterior string lighting installed on balcony,remove signage from window and door panels. Separate permit application to be submitted to repaint the red first floor door, which remains in violation of vcc design guidelines. Note: permit issued in response to violations. Work shall commence no less than days after permit is issued. Work must be completed no less than days after work begins. Owner will call vcc for final inspection upon completion of work. Penalty fees may apply because of improper or unauthorized work.

Wooden elements and trim sw cherish cream, semigloss. Front doors: sw fireweed, semigloss

Remove all existing, unpermitted and or unshielded light fixtures install three (3) remcraft 1 series light fixtures to the masonry wall centered over the second floor window openings fixtures shall be painted white to match adjacent building trim. All conduit and wiring shall be placed on the interior of the building. No conduit to be run across exterior of building. All fixtures shall use lamps with the following criteria: 3000k color temperature, 80+ color rendering index, and 800-12 lumens per bulb note: permit issued in response to violations. Work shall commence no less than days after permit is issued. Work must be completed no less than days after work begins. Owner will call vcc for final inspection upon completion of work. Penalty fees may apply because of improper or unauthorized work.

Retain existing, hanging business signretain hinged first floor windowin response to a violation

Replace existing window to a double hung window (violation) repaint front of the building to match ( 16-38032-vcpnt)

Electrical work- sheetrock

Replace existing window with double hung window; repaint front of the building to match (16-38032-vcpnt)