Remove all existing, unpermitted and/or unshielded light fixtures install three (3) remcraft 1 series light fixtures to the masonry wall centered over the second floor window openings fixtures shall be painted white to match adjacent building trim. All conduit and wiring shall be placed on the interior of the building. No conduit to be run across exterior of building. All fixtures shall use lamps with the following criteria: 3000k color temperature, 80+ color rendering index, and 800-12 lumens per bulb note: permit issued in response to violations. Work shall commence no less than days after permit is issued. Work must be completed no less than days after work begins. Owner will call vcc for final inspection upon completion of work. Penalty fees may apply because of improper or unauthorized work.

Proposal to retain horizontally split in french doors,

Repair all windows as necessary and replace any missing muntins to match existing. Any acrylic glass to be removed and replaced with real glass. Deteriorated soffits to be repaired/replaced to match existing and painted white. To prepare for painting by sanding (rotary sanders cannot be used), making minor millwork and masonry repairs as necessary to match existing conditions (masonry mix must be soft, with maximum portland cement content not to exceed 1 part to 12) and to paint as follows to match existing conditions: wooden elements including windows, frames, shop windows, fascia/soffit/outriggers of gallery... Cherish cream, sw94lrv78, semigloss masonry trim elementscherish cream, sw94lrv78 ground floor doors on conti elevationfire weed, sw 6328, semigloss shuttersgreenfield sw 6439, semiglossthis permit prohibits the application of the following exterior coating materials and paints: sealers, ceramic coatings/paints, elastomeric coatings/paints, waterproofing/water repellent coatings

Remove all existing, unpermitted and or unshielded light fixtures install three (3) remcraft 1 series light fixtures to the masonry wall centered over the second floor window openings fixtures shall be painted white to match adjacent building trim. All conduit and wiring shall be placed on the interior of the building. No conduit to be run across exterior of building. All fixtures shall use lamps with the following criteria: 3000k color temperature, 80+ color rendering index, and 800-12 lumens per bulb note: permit issued in response to violations. Work shall commence no less than days after permit is issued. Work must be completed no less than days after work begins. Owner will call vcc for final inspection upon completion of work. Penalty fees may apply because of improper or unauthorized work.

Repair all windows as necessary and replace any missing muntins to match existing. Any acrylic glass to be removed and replaced with real glass. Deteriorated soffits to be repaired replaced to match existing and painted white. To prepare for painting by sanding (rotary sanders cannot be used), making minor millwork and masonry repairs as necessary to match existing conditions (masonry mix must be soft, with maximum portland cement content not to exceed 1 part to 12) and to paint as follows to match existing conditions: wooden elements including windows, frames, shop windows, fascia soffit outriggers of gallery... Cherish cream, sw94lrv78, semigloss masonry trim elementscherish cream, sw94lrv78 ground floor doors on conti elevationfire weed, sw 6328, semigloss shuttersgreenfield sw 6439, semiglossthis permit prohibits the application of the following exterior coating materials and paints: sealers, ceramic coatings paints, elastomeric coatings paints, waterproofing water repellent coatings

Retaining existing skin sign under balcony as per vcc approval

Retaining existing sign under balcony as per vcc approval