Remove 3 existing antennas and install 3 new lte antennas in thier positions also installing related ancillary equipment as per plans as per code. If installing suppression system in equipment cabinet then separate permit is required.

Original permit description:(com2013-01281)replacing (3) obsolete antennas with new model type replacing (3) obsolete transcievers currently located at the base to the backside of the new antennas as per plans and as per code. If installing suppression s

Replacing (3) obsolete antennas with new model type replacing (3) obsolete transcievers currently located at the base to the backside of the new antennas as per plans and as per code. If installing suppression system in equipment cabinet(s) then a separ

Original permit description:(com2012-19591)ground work only. Remove and replace (1) existing cabinet. All work to be completed as per plans as per code. If installing suppression system in equipment cabinet then a separate permit is required.

Ground work only. Remove and replace (1) existing cabinet. All work to be completed as per plans as per code. If installing suppression system in equipment cabinet then a separate permit is required.

Addition of three antennas on existing communications structure . No change in height as per plans as per code. If installing suppression system in equipment cabinet(s) then a separate permit is required.

Request for time extension on permit com2009-13043 issued on 07/17/09 with original completion date of 01/17/10. Original permit description:(com2009-13043)addition of 3 antennas on existing communications structure. No change in heights. Clear wireless

Addition of 3 antennas on existing communications structure. No change in heights. Clear wireless llc atc 305176. If installing suppression system in equipment cabinets then a separate permit will be required.

Amend permit com2008-12994 issued on 08/29/08 with plans #2008-646 to add electrical contractor as listed above. Original permit description:(com2008-12994)addition of antenna on existing telecommunical structure no height increase addition of equipmen

Request for time extension on permit com2008-12994 issued on 08/29/08 with original completion date of 03/01/09. Original permit description:(com2008-12994)addition of antenna on existing telecommunical structure no height increase addition of equipment

1-2 amp single phase 120/208 volt service for new cellular phone equipment. New telephone cable for equipment as per code.

Addition of antenna on existing telecommunical structure no height increase addition of equipment cabinets and 4/ x 8 equipment platform and meter box as per plans and as per code.

Use portion of premises suite b for general warehousing (storage & shipping of motor vehicles)

Sprint/nextel currently has a telecom tower at this site. The proposed modification involves the replacement of the existing antennas w/9 new antennas of the same size. This was previously approved for permit but sprint has changed antenna models. The dim

Reinstate permit # com2005-25893 for thirty (30) days for final inspection. Original permit description:(com2005-25893)amend permit # com2005-104 issued on 5/20/05 w/ plan # 475 to add low voltage contractor as listed

Amend permit# com2006-14306 issued on 7/24/06 to add contractors listed above. Original permit description:(com2006-14306)attach 2 dish antennas to existing tower with equipment cabinets @ base of tower on 4x4 pad inside existing compound as per plan as pe

Attach 2 dish antennas to existing tower with equipment cabinets @ base of tower on 4x4 pad inside existing compound as per plan as per code. Zoned-m

Amend permit # com2005-104 issued on 5/20/05 w/ plan # 475 to add low voltage contractor as listed

Maintenance upgrade-replacement of 9 existing antennas with 6 on an existing self-support tower and install 1 equipment cabinet within a existing unmanned equipment shelter.

Amend permit# com2004-28166 issue date 1/11/05 to add electrical contractor as listed above.

Install new equipment shelter remove section of fence install new fence to match. Install new antennas on existing self support tower

Install new 200amp service and add 3 circuits

Attach antenna platform to an existing 1 foot high lattice tower to be used for mounting (6) antennas. Construct 10x15 concrete pad at base of tower for equipment cabinets as per plans.

Request for time extension on permit com2008-12994 issued on 08/29/08 with original completion date of 03/01/09. Original permit description:(com2008-12994)addition of antenna on existing telecommunical structure no height increase addition of equipment cabinets and 4/ x 8 equipment platform and meter box as per plans and as per code.

Request for time extension on permit com2009-13043 issued on 07/17/09 with original completion date of 01/17/10. Original permit description:(com2009-13043)addition of 3 antennas on existing communications structure. No change in heights. Clear wireless llc atc 305176. If installing suppression system in equipment cabinets then a separate permit will be required.

Amend permit com2008-12994 issued on 08/29/08 with plans #2008-646 to add electrical contractor as listed above. Original permit description:(com2008-12994)addition of antenna on existing telecommunical structure no height increase addition of equipment cabinets and 4/ x 8 equipment platform and meter box as per plans and as per code.

Replacing (3) obsolete antennas with new model type replacing (3) obsolete transcievers currently located at the base to the backside of the new antennas as per plans and as per code. If installing suppression system in equipment cabinet(s) then a separate permit is required

Amend permit# com2006-14306 issued on 7/24/06 to add contractors listed above. Original permit description:(com2006-14306)attach 2 dish antennas to existing tower with equipment cabinets @ base of tower on 4x4 pad inside existing compound as per plan as per code. Zoned-m

Sprint/nextel currently has a telecom tower at this site. The proposed modification involves the replacement of the existing antennas w/9 new antennas of the same size. This was previously approved for permit but sprint has changed antenna models. The dimensions however remain the same as per plans and code.

Original permit description:(com2013-01281)replacing (3) obsolete antennas with new model type replacing (3) obsolete transcievers currently located at the base to the backside of the new antennas as per plans and as per code. If installing suppression system in equipment cabinet(s) then a separate permit is required

Install three antennas six coax cables and three rrus to an existing wireless telecommunications facility as per plans as per code. If installing suppression system in equipment cabinet then separate permit is required.

Install new 2 amp service and add 3 circuits

Antennas: this will be a one for one switch out of the existing cellular antennas located on the telecommunications tower. There will be no additional antennas added to this site. Please see submitted plans

Amend permit#com2003-31247 issued on 7-18-03 with plans# 861 to change prime contractor from allegheney industries to contractor stated above.

Upgrade existing telecommunication site by removing 3 antennas and replacing with 3 new antennas and add a new hybrid cable as per plans as per code if installing suppression system in equipment cabinet then separate permit is required.

Replace 3 existing antennas with 3 new and add 3 new remote radio head units to the existing tower as per plans as per code. If installing suppression system in equipment cabinet then separate permit is required.

Install (1) 120 2 v single-phase automatic transfer switch w existing 130kw generator and underground conduits and feeders. As per code.

Add (1) new panel antenna to existing cell site (no ground work disturbance) as per plans as per code.

Extend permit com2017-021 issued on 02 22 17 with original completion date of 08 22 17. (original permit:com2017-02140:replace 3 existing antennas with 3 new and add 3 new remote radio head units to the existing tower as per plans as per code. If installing suppression system in equipment cabinet then separate permit is required.)original permit description:(com2017-02140)replace 3 existing antennas with 3 new and add 3 new remote radio head units to the existing tower as per plans as per code. If installing suppression system in equipment cabinet then separate permit is required.

1-2 amp single phase 120 208 volt service for new cellular phone equipment. New telephone cable for equipment as per code.

Request for time extension on permit com2008-12994 issued on 08 29 08 with original completion date of 03 01 09. Original permit description:(com2008-12994)addition of antenna on existing telecommunical structure no height increase addition of equipment cabinets and 4 x 8 equipment platform and meter box as per plans and as per code.

Amend permit com2008-12994 issued on 08 29 08 with plans #2008-646 to add electrical contractor as listed above. Original permit description:(com2008-12994)addition of antenna on existing telecommunical structure no height increase addition of equipment cabinets and 4 x 8 equipment platform and meter box as per plans and as per code.

Amend permit# com2004-28166 issue date 1 11 05 to add electrical contractor as listed above.

Amend permit # com2005-104 issued on 5 20 05 w plan # 475 to add low voltage contractor as listed

Amend permit# com2006-14306 issued on 7 24 06 to add contractors listed above. Original permit description:(com2006-14306)attach 2 dish antennas to existing tower with equipment cabinets @ base of tower on 4x4 pad inside existing compound as per plan as per code. Zoned-m

Reinstate permit # com2005-25893 for thirty (30) days for final inspection. Original permit description:(com2005-25893)amend permit # com2005-104 issued on 5 20 05 w plan # 475 to add low voltage contractor as listed

Request for time extension on permit com2009-13043 issued on 07 17 09 with original completion date of 01 17 10. Original permit description:(com2009-13043)addition of 3 antennas on existing communications structure. No change in heights. Clear wireless llc atc 305176. If installing suppression system in equipment cabinets then a separate permit will be required.

Addition of antenna on existing telecommunical structure no height increase addition of equipment cabinets and 4 x 8 equipment platform and meter box as per plans and as per code.

Sprint nextel currently has a telecom tower at this site. The proposed modification involves the replacement of the existing antennas w 9 new antennas of the same size. This was previously approved for permit but sprint has changed antenna models. The dimensions however remain the same as per plans and code.