Convert an existing 3 gang meter bank into a 4 gang meter bank. Add 1 new 1 amp panel . Replace 1 1 amp panel with a new 1 amp panel. Remove aluminum service entrance cable feeding 2 of the panels. Install new 1" rigid conduits to feed 3 panels and reuse existing 1 1 2" rigid conduit feeding 1 panel. Run new grounding on the outside via a ground rod. Install new copper supplemental ground wire to street side of water valve. Bond all panels together and back to meter bank. The three existing meters are mounted on the side of the porch on the back of the building. We are going to install the new meters in the same place and run the conduits under the porch through the crawl space. The point of entry will be when we go from under the porch into the basement to the panels.