To install two (2) eyemax 1080p ip68 hammer vandal-resistantdome security cameras mounted to underside of gallery per cut sheet submitted 12/09/15 & stamped vcc approved 12/10/15. Cameras shall be painted white to match adjacent building surface. All conduit and wiring shall be placed along the inside corners of building surfaces as much as possible, such as along gallery/balcony purlins at the deck line, and painted to match the adjacent surfaces. All cameras to be installed a minimum of 9-feet above the sidewalk and a maximum of 18-inches below the bottom of the balcony, gallery, porch ceiling, roof overhang, or soffit.

Adding security cameras where there are none now.

To install two (2) eyemax 1080p ip68 hammer vandal-resistantdome security cameras mounted to underside of gallery per cut sheet submitted 12 09 15 & stamped vcc approved 12 10 15. Cameras shall be painted white to match adjacent building surface. All conduit and wiring shall be placed along the inside corners of building surfaces as much as possible, such as along gallery balcony purlins at the deck line, and painted to match the adjacent surfaces. All cameras to be installed a minimum of 9-feet above the sidewalk and a maximum of 18-inches below the bottom of the balcony, gallery, porch ceiling, roof overhang, or soffit.

To prepare for painting by sanding (rotary sanders cannot be used), making minor millwork and masonry repairs as necessary to match existing conditions (masonry mix must be soft, with maximum portland cement content not to exceed 1 part to 12) and to paint as follows to match existing conditions:shutters... Essex greentrim... Whitebalcony decking... Battleship greyshutters will be removed and moved off-site for work, and will be reinstalled to match existing