Original permit description:(com2012-10013)exterior work-remove and replace existing antennas on existing sturcture. Antenna will be located at same rad center as existing. Add (1) support equipment cabinet at excisting location. As per plans as per code

Exterior work-remove and replace existing antennas on existing sturcture. Antenna will be located at same rad center as existing. Add (1) support equipment cabinet at excisting location. As per plans as per code. If installing suppression system in equip

Interior work: 1 2 sq. Ft.; exterior work; run fiber conduit from basement to rooftop; install fiber control box on rooftop; all work will be done as per plans and as per code. If installing suppression system in equipment cabinet then a separate permit

Exterior work - remove/replace (1) equipment cabinet on platform on rooftop. Upgrade (1) equipment cabinet on platform on rooftop. Remove/replace (9) antennas on rooftop. As per plans and as per code. If installing suppression system in equipment cabinet

Amend permit#com2009-10603 issued on 5/22/09 with plans #2009-578 to add the following additional work: 3 additional antennas to existing permit as per plans & as per code. If installing supprssion system in equipment cabinet(s) then a separate permit is

Install (2) dish antennas on existing rooftop as per plans as per code. If installing suppression system in equipment cabinet(s) then a separate permit will be required.

Replace existing 800amp service equipment with new 8 amp (in same location). Meter center to serve existing loads 5 ckts 5 meters - 200amp.

Install new dish antennas to existing rooftop as per plans and as per code.

Request for time extension on permit#com2007-00087 isued on 2-13-07 with original completion date of 8-13-07. Original permit description:(com2007-00087)remove and replace antennas on existing roof. Install new equipment cabinet on proposed steel platform

Amend permit#com2007-00087 issued on 2-13-07 with plans #2007-3 to add contractors as listed above. Original permit description:(com2007-00087)remove and replace antennas on existing roof. Install new equipment cabinet on proposed steel platform on roof as

Replacement of concrete in front of building appprox. 4 sf- 14 x asper code.

Remove and replace antennas on existing roof. Install new equipment cabinet on proposed steel platform on roof as per plans and code. Per bmza 1089-06 approved 12/5/06.

Apc realty and equipment co llc(trading as sprint pcs) desires to add equipment and antennas to the existing roof top telecommunication facility previously insure by omni point communication. Sprint pcs intends to add six antenna with five electronic equ

Amend permit # com2002-05206 to name electrical contractor

Construct a x 15 rooftop platform with equipment cabinets and install 6 antennas on existing building per plans. Per bmza 02-180.

Amend permit#com2009-10603 issued on 5/22/09 with plans #2009-578 to add the following additional work: 3 additional antennas to existing permit as per plans & as per code. If installing supprssion system in equipment cabinet(s) then a separate permit is required. Request for time extension on permit#com2009-10603 issued on 5-22-09 with original completion date of 11-22-09. Original permit description:(com2009-10603)install (2) dish antennas on existing rooftop as per plans as per code. If installing suppression system in equipment cabinet(s) then a separate permit will be required.

Original permit description:(com2012-10013)exterior work-remove and replace existing antennas on existing sturcture. Antenna will be located at same rad center as existing. Add (1) support equipment cabinet at excisting location. As per plans as per code. If installing suppression system in equipment cabinet then separate permit is required.

Exterior work - remove/replace (1) equipment cabinet on platform on rooftop. Upgrade (1) equipment cabinet on platform on rooftop. Remove/replace (9) antennas on rooftop. As per plans and as per code. If installing suppression system in equipment cabinet then separate permit is required.

Exterior work-remove and replace existing antennas on existing sturcture. Antenna will be located at same rad center as existing. Add (1) support equipment cabinet at excisting location. As per plans as per code. If installing suppression system in equipment cabinet then separate permit is required.

Interior work: 1 2 sq. Ft.; exterior work; run fiber conduit from basement to rooftop; install fiber control box on rooftop; all work will be done as per plans and as per code. If installing suppression system in equipment cabinet then a separate permit is required.

Amend permit#com2007-00087 issued on 2-13-07 with plans #2007-3 to add contractors as listed above. Original permit description:(com2007-00087)remove and replace antennas on existing roof. Install new equipment cabinet on proposed steel platform on roof as per plans and code. Per bmza 1089-06 approved 12/5/06.

Request for time extension on permit#com2007-00087 isued on 2-13-07 with original completion date of 8-13-07. Original permit description:(com2007-00087)remove and replace antennas on existing roof. Install new equipment cabinet on proposed steel platform on roof as per plans and code. Per bmza 1089-06 approved 12/5/06.

Apc realty and equipment co llc(trading as sprint pcs) desires to add equipment and antennas to the existing roof top telecommunication facility previously insure by omni point communication. Sprint pcs intends to add six antenna with five electronic equipment cabinets for telecommunication. The cabinets will be place on the existing still frame platform used by omni point communication per bmza 294-04 approved 7/20/04.