Comment date: thu oct 16 00:00: edt 2003 - 10/16/03 10:34:14 am residential addition deck and laundry room;scc; comment date: fri oct 17 00:00: edt 2003 - setbacks along street right of ways must be m

10/16/03 10:34:14 am residential addition deck and laundry room;scc; setbacks along street right of ways must be measured from the street right of way line or the street, whichever is closest to the property. All other setbacks are to be measured from the property boundary lines. Setbacks also apply such items as porches, decks, patios, etc.; building comments: refer to your approved plans and attached plan review comments regarding code-related issues or corrections. Work done without a permit is not structurally sufficient for the minimum design loads. Refer to plan review comment #1 attached to the plans, where undersized members are specifically identified. The owner shall engage the services of a professional designer (structural engineer) to provide analysis and design for correction of the substandard framing. The professional designers analysis and design shall be in writing, and be on the jobsite for inspections. The

10/16/03 10:34:14 am residential addition deck and laundry room;scc; comment date: fri oct 17 00:00: edt 2003 - setbacks along street right of ways must be m

Residential

10 16 03 10:34:14 am residential addition deck and laundry room;scc; comment date: fri oct 17 00:00: edt 2003 - setbacks along street right of ways must be m

10 16 03 10:34:14 am residential addition deck and laundry room;scc; setbacks along street right of ways must be measured from the street right of way line or the street, whichever is closest to the property. All other setbacks are to be measured from the property boundary lines. Setbacks also apply such items as porches, decks, patios, etc.; building comments: refer to your approved plans and attached plan review comments regarding code-related issues or corrections. Work done without a permit is not structurally sufficient for the minimum design loads. Refer to plan review comment #1 attached to the plans, where undersized members are specifically identified. The owner shall engage the services of a professional designer (structural engineer) to provide analysis and design for correction of the substandard framing. The professional designers analysis and design shall be in writing, and be on the jobsite for inspections. The