Modify the existing wetpipe type system to meet new partitions and ceiling layout. Relocate 48 and add 4 sprinkler heads phase 1 first floor as per code

Modify the existing wetpipe type system to meet new partitions and ceiling layout. Relocate 49 and add 2 sprinkler heads for proper coverage per nfpa #13 phase ii first floor as per code

Original permit description:(com2014-03094)interior renovation modifying hvac system refrigeration systems and lighting systems. Separate permits are required for sprinkler and fire alarm systems alterations. Repairing exterior items around the buildin

Non-structural alteration - low voltage as per code

Interior renovation modifying hvac system refrigeration systems and lighting systems. Separate permits are required for sprinkler and fire alarm systems alterations. Repairing exterior items around the building in disrepair repainting exterior doors

"non-structural alterations/exterior work - removal of existing signage and replace 4 wall and faces only in 2 ground signs. North and east elevations: install 2 - 8 1/2"" x 9-6"" sign cabinets. Sign copy aldi with logo = 76. Sq. Ft. Each. North and ea"

Category1: non structural alterations: interior work: 17 719 sq ft: demo of existing ceilings drywall interior walls cooler freezer stove fixtures roofing windows and doors. Separate permit require for tenant fitout.

Use entire bld for auto body & paint shop w/sales of automobiles per bmza 728-06. Conditions; 1) no storing vehicles in any manor on public right of way 2.) no storage of unlicensed vehicles on property 3.) all work must be performed indoors 4.) all pa

"installation of (2) double-faced non illuminated sign faces reading ""food market"". Installed on both of the existing pulaski hwy and e. Fayette st elevation pylon poles/signs. The new signs will be dimensions: (2) @ 2 height x 4 width = 8 sf each. As"

Use premises for motor vehicle sales and auto paint services including accessory garage for repairs and body shop

Construct retainer wall at rear and side. As per drawings and code.

Amend permit# com2006-38063 issued 7/30/07 to add contractor listed above. Original permit description:(com2006-38063)construct new pre-fabricated steel warehouse building as per plans and plans.

Replace outside water & sewline. As per code.

Amend permit #com2007-38603 issued on 2/8/07 to change contractor as listed above. Original permit description:(com2006-38063)construct new pre-fabricated steel warehouse building as per plans and plans.

Interior new finishes store fixtures only. No mechanical(hvac) minor lighting changes. Paint paneling and wall paper only as per plans and code. Separate permit will be required for sprinkler system.

Category i. Demo remove part of old lighting fixtures and install new 2 x 4 lay in total of 28. Add six new 3 wire branch circuits for coolers. Add one new 3 wire branch circuit in office for new oulet(110volt) asper code.

Construct new pre-fabricated steel warehouse building as per plans and plans.

Replacement 5 ton roof top heat pump with new ductwork. All work as per code.

Installation of (2) double-faced non illuminated sign faces reading food market". Installed on both of the existing pulaski hwy and e. Fayette st elevation pylon poles/signs. The new signs will be dimensions: (2) @ 2 height x 4 width = 8 sf each. As per sketch and code."

Interior renovation modifying hvac system refrigeration systems and lighting systems. Separate permits are required for sprinkler and fire alarm systems alterations. Repairing exterior items around the building in disrepair repainting exterior doors railings bollards modifying the front canopy (to match the new corporate prototype appearance) as per plans and as per code.

Non-structural alterations/exterior work - removal of existing signage and replace 4 wall and faces only in 2 ground signs. North and east elevations: install 2 - 8 1/2" x 9-6" sign cabinets. Sign copy aldi with logo = 76. Sq. Ft. Each. North and east elevations 2 - sets channel letters 14 - 3 1/4" x 1-6" = 21. 41 sq. Ft. Existing pylon signs total of 2 signs: install (4) sign cabinets 8 x 2 = 16 sq. Ft. Per side on existing pylon signs. All signs are illuminated and for aldi food market. All work done as per sketch/code and on private property.

Original permit description:(com2014-03094)interior renovation modifying hvac system refrigeration systems and lighting systems. Separate permits are required for sprinkler and fire alarm systems alterations. Repairing exterior items around the building in disrepair repainting exterior doors railings bollards modifying the front canopy (to match the new corporate prototype appearance) as per plans and as per code.

Use entire bld for auto body & paint shop w/sales of automobiles per bmza 728-06. Conditions; 1) no storing vehicles in any manor on public right of way 2.) no storage of unlicensed vehicles on property 3.) all work must be performed indoors 4.) all parts & equipment must be stored in doors at all times and 5.) screening & landscaping to be approved by dept of planning and maintained to comply by owner/operators.

Fence around property ft on 32 e fayette st with one gate and 1 ft on w north st with one gate. 8 high

(use) entire premises as an auto repair garage including body and fender repair.

Installation of (2) double-faced non illuminated sign faces reading "food market". Installed on both of the existing pulaski hwy and e. Fayette st elevation pylon poles/signs. The new signs will be dimensions: (2) @ 2 height x 4 width = 8 sf each. As per sketch and code.

Amend permit #com2007-38603 issued on 2 8 07 to change contractor as listed above. Original permit description:(com2006-38063)construct new pre-fabricated steel warehouse building as per plans and plans.

Amend permit# com2006-38063 issued 7 30 07 to add contractor listed above. Original permit description:(com2006-38063)construct new pre-fabricated steel warehouse building as per plans and plans.

Installation of (2) double-faced non illuminated sign faces reading "food market". Installed on both of the existing pulaski hwy and e. Fayette st elevation pylon poles signs. The new signs will be dimensions: (2) @ 2 height x 4 width = 8 sf each. As per sketch and code.

Use entire bld for auto body & paint shop w sales of automobiles per bmza 728-06. Conditions; 1) no storing vehicles in any manor on public right of way 2.) no storage of unlicensed vehicles on property 3.) all work must be performed indoors 4.) all parts & equipment must be stored in doors at all times and 5.) screening & landscaping to be approved by dept of planning and maintained to comply by owner operators.

Non-structural alterations exterior work - removal of existing signage and replace 4 wall and faces only in 2 ground signs. North and east elevations: install 2 - 8 1 2" x 9-6" sign cabinets. Sign copy aldi with logo = 76. Sq. Ft. Each. North and east elevations 2 - sets channel letters 14 - 3 1 4" x 1-6" = 21. 41 sq. Ft. Existing pylon signs total of 2 signs: install (4) sign cabinets 8 x 2 = 16 sq. Ft. Per side on existing pylon signs. All signs are illuminated and for aldi food market. All work done as per sketch code and on private property.