Re-roof 24 squares 3-tab shingles with lb. Felt underlayment on regular roof pitch.

Interior remodel of existing house

Install 15 squares r panel metal roofing using synthetic polymer underlayment over existing shingle roof. Tear off existing flat roof and replace with 5 squares of 2 ply modified bitumen.

Interior remodel of existing house and remove and replace windows and doors

Hey sorry for all the delays. Well the labor is basically remove about 1 sq ft of asphalt, remove about sq ft of cracked sidewalk out front, remove sq ft of pavers, remove 16 of curbing, and then remove 1 load of sod dirt at the new driveway. We will haul all these items to the dump. Then we will grade out the area, form 16 of curb at old asphalt area, form 46 x of driveway with sidewalk, form a 7 apron that flares to 16 wide, form sidewalk where pavers are currently, form connecting sidewalk to new driveway, finish grade areas to 4" deep, and 6" deep at apron. Then we will pour approximately 661 sq ft of area and 16 of new curbing with a concrete pump. All area will be broom finished. Then cut expansion lines and remove all forms. The material is 2 of forms, stakes, screws, tapcons, epoxy, 2 rods of steel, and approximately 11+ yards of fiber mesh concrete. I have not figured any permit costs yet because you can probably do this one online or a quick walk in as a homeowner to save sev