"install 4"" backflow to existing fire line. Install 2"" backflow to existing 2"" domestic as per code."

Original permit description:(com2012-09576)non-structural alterations/exterior work - remove and replace existing antennas on existing structure. Antenna will be located at same rad center as existing. Remove and replace 1 equipment cabinet at existing lo

Non-structural alterations/exterior work - remove and replace existing antennas on existing structure. Antenna will be located at same rad center as existing. Remove and replace 1 equipment cabinet at existing location as per plans as per code. If instal

Interior work - adding one amp circuit and a cabinet as per code.

Remove (2) 0 gallon underground heating oil tanks back fill w/ crg to grade & compete as per code

Amend permit # com2009-04577 issued on 03-05-09 with plans # 2009-226 to add prime and electrical contractors as listed above. Original permit description:(com2009-04577)proposed six antennas 13 x 17 concrete pad and 8 wood fence and related cables and

Proposed six antennas 13 x 17 concrete pad and 8 wood fence and related cables and unmanned cabinets/co location. As per bmza 52-09 approved on 02/03/09. As per plans as per code. If installing supression system in equipment cabinet(s) then a separate

Repair existing 16x corrugated metal shed roof. Shettering the loading dock attached to the building by replacing 22 gauge galvanized corrugated steel panels and underlying 4x4 wood stringers in-kind as per code.

Amend permit # com2009-04577 issued on 03-05-09 with plans # 2009-226 to add prime and electrical contractors as listed above. Original permit description:(com2009-04577)proposed six antennas 13 x 17 concrete pad and 8 wood fence and related cables and unmanned cabinets/co location. As per bmza 52-09 approved on 02/03/09. As per plans as per code. If installing supression system in equipment cabinet(s) then a separate permit will is required.

Proposed six antennas 13 x 17 concrete pad and 8 wood fence and related cables and unmanned cabinets/co location. As per bmza 52-09 approved on 02/03/09. As per plans as per code. If installing supression system in equipment cabinet(s) then a separate permit will is required.

Original permit description:(com2012-09576)non-structural alterations/exterior work - remove and replace existing antennas on existing structure. Antenna will be located at same rad center as existing. Remove and replace 1 equipment cabinet at existing location as per plans as per code. If installing suppression system in equipment cabinet then a separate permit is required.

Non-structural alterations/exterior work - remove and replace existing antennas on existing structure. Antenna will be located at same rad center as existing. Remove and replace 1 equipment cabinet at existing location as per plans as per code. If installing suppression system in equipment cabinet then a separate permit is required.

Install 4" backflow to existing fire line. Install 2" backflow to existing 2" domestic as per code.

Install a temp. Water connection from hydrant located on the corner of guilford ave. And federal st. To supply domestic water to tenants at 1601 guilford ave . Flexible piping shall be used as per dept. Of public works. Plumber shall install a 2" backflow preventer on the temp. Line . All piping shall be secured accross sidewalks.

Install 4 inch water service and 2 backflow devices

Certification for 2-4" backflow devices and one-2" backflow

(use) entire premises for artists studios for both live and work units. To include an art gallery on the 4th floor. Basement level to contain 2 artists studios 1st floor to contain one artist studio and one artist live-in studio 2nd floor to contain one artist studio and one artist live-in studio 3rd floor to contain one artist studio and one live-in artist studio 4th floor to contain one artist live-in studio and an art gallery 5th floor to contain 2 artist studios. Per p. U. D. And ordinance # 03-533 issued may 9 2003. No expiration date

Install fire rated drywall and doors in corridors as per code. C/o pending

Electrical room refurbishment relocation of existing building electrical room to a new electrical room installation of all new switch gear and elec equip and meters (no change in total building load. No change in building use) as per plans as per code.

Remove and replace five antennas and add one rru as per plans as per code.

Proposed six antennas 13 x 17 concrete pad and 8 wood fence and related cables and unmanned cabinets co location. As per bmza 52-09 approved on 02 03 09. As per plans as per code. If installing supression system in equipment cabinet(s) then a separate permit will is required.

Original permit description:(com2012-09576)non-structural alterations exterior work - remove and replace existing antennas on existing structure. Antenna will be located at same rad center as existing. Remove and replace 1 equipment cabinet at existing location as per plans as per code. If installing suppression system in equipment cabinet then a separate permit is required.

Amend permit # com2009-04577 issued on 03-05-09 with plans # 2009-226 to add prime and electrical contractors as listed above. Original permit description:(com2009-04577)proposed six antennas 13 x 17 concrete pad and 8 wood fence and related cables and unmanned cabinets co location. As per bmza 52-09 approved on 02 03 09. As per plans as per code. If installing supression system in equipment cabinet(s) then a separate permit will is required.

Remove (2) 0 gallon underground heating oil tanks back fill w crg to grade & compete as per code

Install fire rated drywall and doors in corridors as per code. C o pending

Non-structural alterations exterior work - remove and replace existing antennas on existing structure. Antenna will be located at same rad center as existing. Remove and replace 1 equipment cabinet at existing location as per plans as per code. If installing suppression system in equipment cabinet then a separate permit is required.