ACTIVITY
PERMITS VALUATION
RENOVATIONS
Get several free quotes from best contractors in your area.
| Content | Date | Cost | Contractor Rank | Address | Contractor |
|---|---|---|---|---|---|
All work is complete original permit description:(com2014-02455)install 2 a service switch to feed new 2 a panelboard. Install 18 branch circuits for heat trace on customer property outside industrial zone as per code.  Date: September 16, 2014Permit id: Com2014-19758 | |||||
"non-structural alterations/exterior work - remove and reconstruct damaged porch rail 36"" high on 2nd floor of rear at above property address - dimensions: same as existing. Remove and install new basement door - same size/location. Repair damaged siding o" Date: April 22, 2014 Value: $800Permit id: Com2014-08157 | |||||
Install 2 a service switch to feed new 2 a panelboard. Install 18 branch circuits for heat trace on customer property outside industrial zone as per code. Date: February 19, 2014Value: $50,000Permit id: Com2014-02455 | |||||
Original permit description:(com2013-01741)adding one new microwave dish using existing mount as per plans and as per code. If installing suppression system in equipment cabinet(s) then a separate permit is required Date: May 28, 2013Permit id: Com2013-10716 | |||||
Adding one new microwave dish using existing mount as per plans and as per code. If installing suppression system in equipment cabinet(s) then a separate permit is required Date: February 22, 2013Value: $15,000Permit id: Com2013-01741 | |||||
T mobile will remove and replace (6) antennas at this existing telecom tower as per plans and as per code. If installing suppression system in equipment cabinet then a separate permit is required. Date: December 12, 2012Value: $10,000Permit id: Com2012-22139 | |||||
Maintenance upgrade- replacing the existing 12 antennas with twelve new antennas- will using existing antenna frames as per plans and as per code. If installing suppression system in equipment cabinet then a separate permit is required. Date: September 11, 2012Value: $50,000Permit id: Com2012-14849 | |||||
Amend permit#com2012-00272 issued on 1/24/12 with plans# 2012-17 to add constractor(s) as listed aboveoriginal permit description:(com2012-00272)replace 2x4 concrete slab on grade and new top panel with wiring for roll-up generator as per plans as per Date: February 6, 2012Permit id: Com2012-02530 | |||||
Replace 2x4 concrete slab on grade and new top panel with wiring for roll-up generator as per plans as per code. Date: January 24, 2012Value: $21,000Permit id: Com2012-00272 | |||||
Original permit description:(com2010-06954)amend permit#com2010-01034 issued on 2-25- to add the following additional work: modification to replace diagonal bracing from 1 to 1 elevation with 2 x2 x 1/4 as per plans as per code. Date: February 3, 2011Permit id: Com2011-02353 | |||||
Original permit description:(com2010-01034)the project consist of the installation of a 11 7 x x 10h unmounted prefabricated equipment shelter and a standby generator on grade 15 antannas will be mounted on an existing 1 lattice tower at 1 a Date: February 3, 2011Permit id: Com2011-02354 | |||||
Original permit description:(com2010-05899)exterior/interior work to install (1) 2 amp electrical service for communication shelter and (1) kw generator as per code. Date: December 9, 2010Permit id: Com2010-27632 | |||||
Addition of three antennas on existing communications structure . No change in height as per plans as per code. If installing suppression system in equipment cabinet(s) then a separate permit is required. Date: November 17, 2010Value: $15,000Permit id: Com2010-20313 | |||||
Gas pipe for stand by generator for verizon wireless (outside) approved by patel Date: May 18, 2010Value: $1,500Permit id: Com2010-09576 | |||||
Amend permit#com2010-01034 issued on 2-25- to add the following additional work: modification to replace diagonal bracing from 1 to 1 elevation with 2 x2 x 1/4 as per plans as per code. Date: May 13, 2010Value: $7,500Permit id: Com2010-06954 | |||||
Exterior/interior work to install (1) 2 amp electrical service for communication shelter and (1) kw generator as per code. Date: March 26, 2010Value: $5,000Permit id: Com2010-05899 | |||||
The project consist of the installation of a 11 7 x x 10h unmounted prefabricated equipment shelter and a standby generator on grade 15 antannas will be mounted on an existing 1 lattice tower at 1 above ground level(agl) per bmza 670- appr Date: February 25, 2010Value: $229,800Permit id: Com2010-01034 | |||||
1 20kw diesal generator with 1-100a transfer switch as per code. Date: February 27, 2009Permit id: Com2009-03551 | |||||
Reinstate permit #com2005-10473 for thirty (30) days for final inspectionoriginal permit description:(com2005-10473)maintenance upgrade-replacement of 9 existing antennas with 6 on an existing self-support tower and install 1 equipment cabinet within a e Date: December 20, 2006Permit id: Com2006-39100 | |||||
Reinstate permit # com2005-25888 for thirty (30) days for final inspection. Original permit description:(com2005-25888)amend permit # com2005-10473 issued on 5/20/05 w/ plan # 475to add low voltage contractor as listed Date: December 5, 2006Permit id: Com2006-36935 | |||||
Install 2 amp single phase 120/2 v services to 1-200amp sub (distrubtion) panel 2-2 pole amp circuits to pad/slab mounted celluar equipment cabinets 1- light and switch 1- 120v amp teleo (verizion) equipment cabinets as per code. Date: June 5, 2006Value: $5,000Permit id: Com2006-17141 | |||||
Install new 1 amp service. Run conduit to communication equipment and install feeders to equipment and energize. Date: May 31, 2006Value: $10,000Permit id: Com2006-16585 | |||||
Attach 2 dish antennas to existing tower with 1 equipment cabinet at base inside existing compound. Date: May 26, 2006Value: $10,000Permit id: Com2006-13999 | |||||
An unmanded telecommunications facility consisting of installing a ground equipment cabinet inside the existing fenced compound and two (2) dish antennas to existing tower as per plans and code. Date: May 4, 2006Value: $5,000Permit id: Com2006-10263 | |||||
The installation of 3 equipment cabinets on a proposed 10x concrete pad in an existing 48x91 fenced compound and the addition of 9 panel antennas to an existing 198 lattice tower as per plans and per code. Date: March 20, 2006Value: $20,000Permit id: Com2006-06903 | |||||
Upgrade 300amp service to 400amp service. As per code. Ckts and ft conduit Date: November 9, 2005Permit id: Com2005-34521 | |||||
Amend permit # com2005-10473 issued on 5/20/05 w/ plan # 475to add low voltage contractor as listed Date: September 2, 2005Permit id: Com2005-25888 | |||||
Maintenance upgrade-replacement of 9 existing antennas with 6 on an existing self-support tower and install 1 equipment cabinet within a existing unmanned equipment shelter. Date: May 20, 2005Value: $25,000Permit id: Com2005-10473 | |||||
The project consist of the installation of a 11 7 x x 10h unmounted prefabricated equipment shelter and a standby generator on grade 15 antannas will be mounted on an existing 1 lattice tower at 1 above ground level(agl) per bmza 670- approved 1/5/2009 as per plans as per code. If installing suppression system in equipment cabinets then a separate permit is required. Date: February 25, 2010Value: $229,800Expiration date: August 25, 2010 | Permit id: Com2010-01034 | |||||
Original permit description:(com2010-01034)the project consist of the installation of a 11 7 x x 10h unmounted prefabricated equipment shelter and a standby generator on grade 15 antannas will be mounted on an existing 1 lattice tower at 1 above ground level(agl) per bmza 670- approved 1/5/2009 as per plans as per code. If installing suppression system in equipment cabinets then a separate permit is required. Date: February 3, 2011Expiration date: March 3, 2011 | Permit id: Com2011-02354 | |||||
Amend permit#com2012-00272 issued on 1/24/12 with plans# 2012-17 to add constractor(s) as listed aboveoriginal permit description:(com2012-00272)replace 2x4 concrete slab on grade and new top panel with wiring for roll-up generator as per plans as per code. Date: February 6, 2012Expiration date: July 24, 2012 | Permit id: Com2012-02530 | |||||
Non-structural alterations/exterior work - remove and reconstruct damaged porch rail 36" high on 2nd floor of rear at above property address - dimensions: same as existing. Remove and install new basement door - same size/location. Repair damaged siding on exterior of building. All work done as per code. Date: April 22, 2014Value: $800Expiration date: October 22, 2014 | Permit id: Com2014-08157 | |||||
Remove three antennas and install six antennas on hybrid cable and three rrus to an existing wireless telecommunications facility as per plans as per code. If installing suppression system in equipment cabinet then separate permit is required. Date: January 6, 2016Value: $15,000Expiration date: July 6, 2016 | Permit id: Com2015-27977 | |||||
Antennas; this will be a "one for one" switch out of the existing antennas located on this lattice tower. There will be no additional antennas added to this tower. Please submitted plans. Date: February 18, 2004Value: $3,500Expiration date: August 18, 2004 | Permit id: Com2003-32196 | |||||
Remove existing generator and concrete slab and construct new slab with emergency generator and fuel tank and construct foundation and erect new equipment shelter per plans. Date: July 23, 2004Value: $30,000Expiration date: July 23, 2005 | Permit id: Com2004-15958 | |||||
Reinstate permit #com2005-10473 for thirty (30) days for final inspectionoriginal permit description:(com2005-10473)maintenance upgrade-replacement of 9 existing antennas with 6 on an existing self-support tower and install 1 equipment cabinet within a existing unmanned equipment shelter. Date: December 20, 2006Expiration date: January 19, 2007 | Permit id: Com2006-39100 | |||||
Install new 30kw diesel generator on 8 x concrete pad as per plans as per code. Date: October 24, 2016Value: $15,000Expiration date: April 24, 2017 | Permit id: Com2016-21974 | |||||
Installing a 2 foot microwave dish and ancillary equipment connecting to the existing at&t equipment/shelter as per plans as per code. If installing suppression system in equipment cabinet then separate permit is required. Date: September 14, 2016Value: $5,000Expiration date: March 14, 2017 | Permit id: Com2016-15908 | |||||
Remove 12 antennas & adding 12 like antennas install 6 rrh and associated equipment as per plans as per code. If installing suppression system in equipment cabinet then separate permit is required. Date: March 21, 2016Value: $14,500Expiration date: September 21, 2016 | Permit id: Com2015-26548 | |||||
Structural reinforcement to existing cell tower only reinforce tower by adding additional bracing members in addition to upgrading some existing bracing members (does not include increasing the height or footprint of the structure and does not include the addition of any antennas or transmission lines) as per plans as per code. Date: July 8, 2016Value: $14,000Expiration date: January 8, 2017 | Permit id: Com2016-15443 | |||||
Replacing (3) existing antennas with (3) new antennas replacing (3) existing radio remote heads (rrh) with (3) new upgraded rrhs and installing an addition (3) new rrh for newer technology as per plans as per code. If installing suppression system in equipment cabinet then separate permit is required. Date: November 21, 2016Value: $25,000Expiration date: May 21, 2017 | Permit id: Com2016-23765 | |||||
Remove 9 and install 6 antennas and associated equipment on existing tower (no ground work) as per plans as per code. If installing suppression system in equipment cabinet then separate permit is required. Date: August 19, 2016Value: $14,500Expiration date: February 19, 2017 | Permit id: Com2016-17589 | |||||
Installing a 2 foot microwave dish and ancillary equipment connecting to the existing at&t equipment shelter as per plans as per code. If installing suppression system in equipment cabinet then separate permit is required. Date: September 14, 2016Value: $5,000Expiration date: March 14, 2017 | Permit id: Com2016-15908 | |||||
Amend permit: add contractor .(original permit:com2016-21974:install new 30kw diesel generator on 8 x concrete pad as per plans as per code.)original permit description:(com2016-21974)install new 30kw diesel generator on 8 x concrete pad as per plans as per code. Date: March 7, 2017Expiration date: April 24, 2017 | Permit id: Com2017-05211 | |||||
Install 1 new antenna on existing cell tower (no ground work disturbance) as per plans as per code. Date: April 27, 2017Value: $15,000Expiration date: October 27, 2017 | Permit id: Com2017-07128 | |||||
Reinstatement(original permit:com2015-27977:remove three antennas and install six antennas on hybrid cable and three rrus to an existing wireless telecommunications facility as per plans as per code. If installing suppression system in equipment cabinet then separate permit is required.) Date: February 16, 2017Expiration date: March 16, 2017 | Permit id: Com2017-03696 | |||||
Amend permit # com2005-10473 issued on 5 20 05 w plan # 475to add low voltage contractor as listed Date: September 2, 2005Expiration date: May 20, 2006 | Permit id: Com2005-25888 | |||||
Reinstate permit # com2005-25888 for thirty (30) days for final inspection. Original permit description:(com2005-25888)amend permit # com2005-10473 issued on 5 20 05 w plan # 475to add low voltage contractor as listed Date: December 5, 2006Expiration date: December 29, 2006 | Permit id: Com2006-36935 | |||||
The project consist of the installation of a 11 7 x x 10h unmounted prefabricated equipment shelter and a standby generator on grade 15 antannas will be mounted on an existing 1 lattice tower at 1 above ground level(agl) per bmza 670- approved 1 5 2009 as per plans as per code. If installing suppression system in equipment cabinets then a separate permit is required. Date: February 25, 2010Value: $229,800Expiration date: August 25, 2010 | Permit id: Com2010-01034 | |||||
Amend permit#com2010-01034 issued on 2-25- to add the following additional work: modification to replace diagonal bracing from 1 to 1 elevation with 2 x2 x 1 4 as per plans as per code. Date: May 13, 2010Value: $7,500Expiration date: August 25, 2010 | Permit id: Com2010-06954 | |||||
Install 2 amp single phase 120 2 v services to 1-200amp sub (distrubtion) panel 2-2 pole amp circuits to pad slab mounted celluar equipment cabinets 1- light and switch 1- 120v amp teleo (verizion) equipment cabinets as per code. Date: June 5, 2006Value: $5,000Expiration date: December 5, 2006 | Permit id: Com2006-17141 | |||||
Exterior interior work to install (1) 2 amp electrical service for communication shelter and (1) kw generator as per code. Date: March 26, 2010Value: $5,000Expiration date: September 26, 2010 | Permit id: Com2010-05899 | |||||
Non-structural alterations exterior work - remove and reconstruct damaged porch rail 36" high on 2nd floor of rear at above property address - dimensions: same as existing. Remove and install new basement door - same size location. Repair damaged siding on exterior of building. All work done as per code. Date: April 22, 2014Value: $800Expiration date: October 22, 2014 | Permit id: Com2014-08157 | |||||
Original permit description:(com2010-05899)exterior interior work to install (1) 2 amp electrical service for communication shelter and (1) kw generator as per code. Date: December 9, 2010Expiration date: January 9, 2011 | Permit id: Com2010-27632 | |||||
Original permit description:(com2010-06954)amend permit#com2010-01034 issued on 2-25- to add the following additional work: modification to replace diagonal bracing from 1 to 1 elevation with 2 x2 x 1 4 as per plans as per code. Date: February 3, 2011Expiration date: March 3, 2011 | Permit id: Com2011-02353 | |||||
Original permit description:(com2010-01034)the project consist of the installation of a 11 7 x x 10h unmounted prefabricated equipment shelter and a standby generator on grade 15 antannas will be mounted on an existing 1 lattice tower at 1 above ground level(agl) per bmza 670- approved 1 5 2009 as per plans as per code. If installing suppression system in equipment cabinets then a separate permit is required. Date: February 3, 2011Expiration date: March 3, 2011 | Permit id: Com2011-02354 | |||||
Amend permit#com2012-00272 issued on 1 24 12 with plans# 2012-17 to add constractor(s) as listed aboveoriginal permit description:(com2012-00272)replace 2x4 concrete slab on grade and new top panel with wiring for roll-up generator as per plans as per code. Date: February 6, 2012Expiration date: July 24, 2012 | Permit id: Com2012-02530 |
