Mount 12 antennas on the roof install concrete equipment platform on roof for equipment related to antennas per bmza2015-121 approved w/conditions 5/28/2015 as per plans as per code. If installing suppression system in equipment cabinet then separate

Replacement of three (3) antennas with three (3) new antennas and the addition of three (3) new antennas to an existing rooftop telecommunications facility as per plans as per code.

Replacing (3) obsolete antennas with new model types. Replacing (3) obsolete transceivers currently located at the base to the backside of the new antennas. As per plans and as per code. If installing suppression system in equipment cabinet then a separat

Original permit description:(com2012-03524)non-structurl alterations - adding (3) antennas to roof of existing buiding and placing an equipment cabinet and power panel on a 4 x 12 grated platform on the rooftop as shown on the attached plans per bmza 2

Amend permit # com2012-03524 issued on 03-20-12 with plans # 2012-249 to add prime contractor and electrical contractor as listed above. Original permit description:(com2012-03524)non-structurl alterations - adding (3) antennas to roof of existing buiding

Non-structurl alterations - adding (3) antennas to roof of existing buiding and placing an equipment cabinet and power panel on a 4 x 12 grated platform on the rooftop as shown on the attached plans per bmza 2010-24 and such approval by the bmza was gi

Add 1 cabinets to platform on rooftop. Remove/replace 3 antennas on rooftop. Add 3 antennas on rooftop. As per plan and as per code. If installing suppression system in equipment cabinet then a separate permit is required.

Install 3 antennas at this existing telecommunications site as per plans and code. If installling suppression system in equipment cabinet(s) then a separate permit is required.

Flush mounting three antennas to existing penthouse and placing the associated equipment inside the existing penthouse per bmza 10-24 approved 2/2/ as per plans as per code. If installing suppression system in equipment cabinet(s) then a separate permit

"request for time extension on permit#com2009-12732 issued on 7/10/09 with original completion date of 1/10/10original permit description:(com2009-12732)(1) 2"" backhaul dish antenna on existing building as per plans as per code. If installing suppression"

"(1) 2"" backhaul dish antenna on existing building as per plans as per code. If installing suppression system in equipment cabinet then a separate permit is required."

Amend permit com2008-21088 issued on 09/12/08 with plans #2008-1076 to add electrical (low voltage) contractor as listed above. Original permit description:(com2008-21088)light renovation of (218) apartment affordable housing units. Work includes limited

Amendperit#com2008-21088 issued on 9-12-08 with plans#2008-1076 to change contractors aslisted above. Original permit description:(com2008-21088)light renovation of (218) apartment affordable housing units. Work includes limited appliances flooring cabin

Amend permit#com2008-21088 issued on 9-12-08 w/plans#2008-1076 to name elect contractor as stated above. Original permit description:(com2008-21088)light renovation of (218) apartment affordable housing units. Work includes limited appliances flooring ca

Light renovation of (218) apartment affordable housing units. Work includes limited appliances flooring cabinets fixture replacement and hvac unit replacement. In (11) apartment units work will also include demolition/reconstruction for conversion to h

Replacing antennas and equipment cabinets within existing platform on the roof as per plans and code. Per zoning approval #395-04

Install 1 new unmanned equipment cabinet in existing penthouse and 1 dish antenna mounted to existing penthouse wall as per plans as per code.

Upgrade existing telecom equipment remove and replace equipment cabinets and antennas as per plan as per code.

Amend permit # com2004-26369 issued date 11/10/04 to name electrical contractor name as above

Installation of 9 telecommunication antennas with 4 equipment cabinets on roof per bmza no. 395-04 with conditional approval- any extensions enlargements relocations or structural alterations are subject to a new appeal or amendment by the bmza.

Amend permit com2008-21088 issued on 09/12/08 with plans #2008-1076 to add electrical (low voltage) contractor as listed above. Original permit description:(com2008-21088)light renovation of (218) apartment affordable housing units. Work includes limited appliances flooring cabinets fixture replacement and hvac unit replacement. In (11) apartment units work will also include demolition/reconstruction for conversion to handicapped accessible units. Work also includes modernization of two(2) existing elevators full windows replacement roofing replacement landscaping and planting and minor demolition/reconstruction in first floor common areas and bathrooms as per code. Seperate permit will be required for sprinkler system and fire alaram. Seperate permit will be required for elevators.

Light renovation of (218) apartment affordable housing units. Work includes limited appliances flooring cabinets fixture replacement and hvac unit replacement. In (11) apartment units work will also include demolition/reconstruction for conversion to handicapped accessible units. Work also includes modernization of two(2) existing elevators full windows replacement roofing replacement landscaping and planting and minor demolition/reconstruction in first floor common areas and bathrooms as per code. Seperate permit will be required for sprinkler system and fire alaram. Seperate permit will be required for elevators.

(1) 2" backhaul dish antenna on existing building as per plans as per code. If installing suppression system in equipment cabinet then a separate permit is required.

Request for time extension on permit#com2009-12732 issued on 7/10/09 with original completion date of 1/10/10original permit description:(com2009-12732)(1) 2" backhaul dish antenna on existing building as per plans as per code. If installing suppression system in equipment cabinet then a separate permit is required.

Flush mounting three antennas to existing penthouse and placing the associated equipment inside the existing penthouse per bmza 10-24 approved 2/2/ as per plans as per code. If installing suppression system in equipment cabinet(s) then a separate permit is required.

Amendperit#com2008-21088 issued on 9-12-08 with plans#2008-1076 to change contractors aslisted above. Original permit description:(com2008-21088)light renovation of (218) apartment affordable housing units. Work includes limited appliances flooring cabinets fixture replacement and hvac unit replacement. In (11) apartment units work will also include demolition/reconstruction for conversion to handicapped accessible units. Work also includes modernization of two(2) existing elevators full windows replacement roofing replacement landscaping and planting and minor demolition/reconstruction in first floor common areas and bathrooms as per code. Seperate permit will be required for sprinkler system and fire alaram. Seperate permit will be required for elevators.

Amend permit#com2008-21088 issued on 9-12-08 w/plans#2008-1076 to name elect contractor as stated above. Original permit description:(com2008-21088)light renovation of (218) apartment affordable housing units. Work includes limited appliances flooring cabinets fixture replacement and hvac unit replacement. In (11) apartment units work will also include demolition/reconstruction for conversion to handicapped accessible units. Work also includes modernization of two(2) existing elevators full windows replacement roofing replacement landscaping and planting and minor demolition/reconstruction in first floor common areas and bathrooms as per code. Seperate permit will be required for sprinkler system and fire alaram. Seperate permit will be required for elevators.

Original permit description:(com2012-03524)non-structurl alterations - adding (3) antennas to roof of existing buiding and placing an equipment cabinet and power panel on a 4 x 12 grated platform on the rooftop as shown on the attached plans per bmza 2010-24 and such approval by the bmza was given a time extension on 01/24/12 to 1/24/13 as per plans as per code. If installing suppression system in equipment then a separate permit is required.

Replacing (3) obsolete antennas with new model types. Replacing (3) obsolete transceivers currently located at the base to the backside of the new antennas. As per plans and as per code. If installing suppression system in equipment cabinet then a separate permit is required.

Non-structurl alterations - adding (3) antennas to roof of existing buiding and placing an equipment cabinet and power panel on a 4 x 12 grated platform on the rooftop as shown on the attached plans per bmza 2010-24 and such approval by the bmza was given a time extension on 01/24/12 to 1/24/13 as per plans as per code. If installing suppression system in equipment then a separate permit is required.

Amend permit # com2012-03524 issued on 03-20-12 with plans # 2012-249 to add prime contractor and electrical contractor as listed above. Original permit description:(com2012-03524)non-structurl alterations - adding (3) antennas to roof of existing buiding and placing an equipment cabinet and power panel on a 4 x 12 grated platform on the rooftop as shown on the attached plans per bmza 2010-24 and such approval by the bmza was given a time extension on 01/24/12 to 1/24/13 as per plans as per code. If installing suppression system in equipment then a separate permit is required.

Mount 12 antennas on the roof install concrete equipment platform on roof for equipment related to antennas per bmza2015-121 approved w/conditions 5/28/2015 as per plans as per code. If installing suppression system in equipment cabinet then separate permit is required.

Amend permit: add contractor .(original permit:com2015-14351:mount 12 antennas on the roof install concrete equipment platform on roof for equipment related to antennas per bmza2015-121 approved w/conditions 5/28/2015 as per plans as per code. If installing suppression system in equipment cabinet then separate permit is required.)original permit description:(com2015-14351)mount 12 antennas on the roof install concrete equipment platform on roof for equipment related to antennas per bmza2015-121 approved w/conditions 5/28/2015 as per plans as per code. If installing suppression system in equipment cabinet then separate permit is required.

Amend permit: change scope of work:relocate existing 2 amp disconnect for suite-b(original permit:com2016-20269:amend permit: add contractor .(original permit:com2015-14351:mount 12 antennas on the roof install concrete equipment platform on roof for equipment related to antennas per bmza2015-121 approved w/conditions 5/28/2015 as per plans as per code. If installing suppression system in equipment cabinet then separate permit is required.)original permit description:(com2015-14351)mount 12 antennas on the roof install concrete equipment platform on roof for equipment related to antennas per bmza2015-121 approved w/conditions 5/28/2015 as per plans as per code. If installing suppression system in equipment cabinet then separate permit is required.)original permit description:(com2016-20269)amend permit: add contractor .(original permit:com2015-14351:mount 12 antennas on the roof install concrete equipment platform on roof for equipment related to antennas per bmza2015-121 approved w/co

Amend permit: add gas fitter contractor .(original permit:com2015-14351:mount 12 antennas on the roof install concrete equipment platform on roof for equipment related to antennas per bmza2015-121 approved w/conditions 5/28/2015 as per plans as per code. If installing suppression system in equipment cabinet then separate permit is required.)original permit description:(com2015-14351)mount 12 antennas on the roof install concrete equipment platform on roof for equipment related to antennas per bmza2015-121 approved w/conditions 5/28/2015 as per plans as per code. If installing suppression system in equipment cabinet then separate permit is required.

Amend permit: change contractor . Extend original permit.(original permit:com2015-14351:mount 12 antennas on the roof install concrete equipment platform on roof for equipment related to antennas per bmza2015-121 approved w/conditions 5/28/2015 as per plans as per code. If installing suppression system in equipment cabinet then separate permit is required.)original permit description:(com2015-14351)mount 12 antennas on the roof install concrete equipment platform on roof for equipment related to antennas per bmza2015-121 approved w/conditions 5/28/2015 as per plans as per code. If installing suppression system in equipment cabinet then separate permit is required.

Mount 12 antennas on the roof install concrete equipment platform on roof for equipment related to antennas per bmza2015-121 approved w conditions 5 28 2015 as per plans as per code. If installing suppression system in equipment cabinet then separate permit is required.

Replace 4 existing antennas with 4 new antennas replace 1 19 mhz radio with 1 new 19 mhz install 3 new radio heads as per plan as per code.

Reinstatement(original permit:com2015-14351:mount 12 antennas on the roof install concrete equipment platform on roof for equipment related to antennas per bmza2015-121 approved w conditions 5 28 2015 as per plans as per code. If installing suppression system in equipment cabinet then separate permit is required.)

Amend permit: add contractor .(original permit:com2015-14351:mount 12 antennas on the roof install concrete equipment platform on roof for equipment related to antennas per bmza2015-121 approved w conditions 5 28 2015 as per plans as per code. If installing suppression system in equipment cabinet then separate permit is required.)original permit description:(com2015-14351)mount 12 antennas on the roof install concrete equipment platform on roof for equipment related to antennas per bmza2015-121 approved w conditions 5 28 2015 as per plans as per code. If installing suppression system in equipment cabinet then separate permit is required.

Amend permit: change contractor . Extend original permit.(original permit:com2015-14351:mount 12 antennas on the roof install concrete equipment platform on roof for equipment related to antennas per bmza2015-121 approved w conditions 5 28 2015 as per plans as per code. If installing suppression system in equipment cabinet then separate permit is required.)original permit description:(com2015-14351)mount 12 antennas on the roof install concrete equipment platform on roof for equipment related to antennas per bmza2015-121 approved w conditions 5 28 2015 as per plans as per code. If installing suppression system in equipment cabinet then separate permit is required.

Amend permit: add gas fitter contractor .(original permit:com2015-14351:mount 12 antennas on the roof install concrete equipment platform on roof for equipment related to antennas per bmza2015-121 approved w conditions 5 28 2015 as per plans as per code. If installing suppression system in equipment cabinet then separate permit is required.)original permit description:(com2015-14351)mount 12 antennas on the roof install concrete equipment platform on roof for equipment related to antennas per bmza2015-121 approved w conditions 5 28 2015 as per plans as per code. If installing suppression system in equipment cabinet then separate permit is required.

Amend permit: change scope of work:relocate existing 2 amp disconnect for suite-b(original permit:com2016-20269:amend permit: add contractor .(original permit:com2015-14351:mount 12 antennas on the roof install concrete equipment platform on roof for equipment related to antennas per bmza2015-121 approved w conditions 5 28 2015 as per plans as per code. If installing suppression system in equipment cabinet then separate permit is required.)original permit description:(com2015-14351)mount 12 antennas on the roof install concrete equipment platform on roof for equipment related to antennas per bmza2015-121 approved w conditions 5 28 2015 as per plans as per code. If installing suppression system in equipment cabinet then separate permit is required.)original permit description:(com2016-20269)amend permit: add contractor .(original permit:com2015-14351:mount 12 antennas on the roof install concrete equipment platform on roof for equipment related to antennas per bmza2015-121 approved w co

Amend permit # com2004-26369 issued date 11 10 04 to name electrical contractor name as above

Light renovation of (218) apartment affordable housing units. Work includes limited appliances flooring cabinets fixture replacement and hvac unit replacement. In (11) apartment units work will also include demolition reconstruction for conversion to handicapped accessible units. Work also includes modernization of two(2) existing elevators full windows replacement roofing replacement landscaping and planting and minor demolition reconstruction in first floor common areas and bathrooms as per code. Seperate permit will be required for sprinkler system and fire alaram. Seperate permit will be required for elevators.

Amend permit#com2008-21088 issued on 9-12-08 w plans#2008-1076 to name elect contractor as stated above. Original permit description:(com2008-21088)light renovation of (218) apartment affordable housing units. Work includes limited appliances flooring cabinets fixture replacement and hvac unit replacement. In (11) apartment units work will also include demolition reconstruction for conversion to handicapped accessible units. Work also includes modernization of two(2) existing elevators full windows replacement roofing replacement landscaping and planting and minor demolition reconstruction in first floor common areas and bathrooms as per code. Seperate permit will be required for sprinkler system and fire alaram. Seperate permit will be required for elevators.

Amendperit#com2008-21088 issued on 9-12-08 with plans#2008-1076 to change contractors aslisted above. Original permit description:(com2008-21088)light renovation of (218) apartment affordable housing units. Work includes limited appliances flooring cabinets fixture replacement and hvac unit replacement. In (11) apartment units work will also include demolition reconstruction for conversion to handicapped accessible units. Work also includes modernization of two(2) existing elevators full windows replacement roofing replacement landscaping and planting and minor demolition reconstruction in first floor common areas and bathrooms as per code. Seperate permit will be required for sprinkler system and fire alaram. Seperate permit will be required for elevators.

Amend permit com2008-21088 issued on 09 12 08 with plans #2008-1076 to add electrical (low voltage) contractor as listed above. Original permit description:(com2008-21088)light renovation of (218) apartment affordable housing units. Work includes limited appliances flooring cabinets fixture replacement and hvac unit replacement. In (11) apartment units work will also include demolition reconstruction for conversion to handicapped accessible units. Work also includes modernization of two(2) existing elevators full windows replacement roofing replacement landscaping and planting and minor demolition reconstruction in first floor common areas and bathrooms as per code. Seperate permit will be required for sprinkler system and fire alaram. Seperate permit will be required for elevators.

Request for time extension on permit#com2009-12732 issued on 7 10 09 with original completion date of 1 10 10original permit description:(com2009-12732)(1) 2" backhaul dish antenna on existing building as per plans as per code. If installing suppression system in equipment cabinet then a separate permit is required.

Flush mounting three antennas to existing penthouse and placing the associated equipment inside the existing penthouse per bmza 10-24 approved 2 2 as per plans as per code. If installing suppression system in equipment cabinet(s) then a separate permit is required.

Add 1 cabinets to platform on rooftop. Remove replace 3 antennas on rooftop. Add 3 antennas on rooftop. As per plan and as per code. If installing suppression system in equipment cabinet then a separate permit is required.

Non-structurl alterations - adding (3) antennas to roof of existing buiding and placing an equipment cabinet and power panel on a 4 x 12 grated platform on the rooftop as shown on the attached plans per bmza 2010-24 and such approval by the bmza was given a time extension on 01 24 12 to 1 24 13 as per plans as per code. If installing suppression system in equipment then a separate permit is required.

Amend permit # com2012-03524 issued on 03-20-12 with plans # 2012-249 to add prime contractor and electrical contractor as listed above. Original permit description:(com2012-03524)non-structurl alterations - adding (3) antennas to roof of existing buiding and placing an equipment cabinet and power panel on a 4 x 12 grated platform on the rooftop as shown on the attached plans per bmza 2010-24 and such approval by the bmza was given a time extension on 01 24 12 to 1 24 13 as per plans as per code. If installing suppression system in equipment then a separate permit is required.

Original permit description:(com2012-03524)non-structurl alterations - adding (3) antennas to roof of existing buiding and placing an equipment cabinet and power panel on a 4 x 12 grated platform on the rooftop as shown on the attached plans per bmza 2010-24 and such approval by the bmza was given a time extension on 01 24 12 to 1 24 13 as per plans as per code. If installing suppression system in equipment then a separate permit is required.