Painting both garden gates to match existing, paint garden half wall (with iron work on top) to match existing, paint the ground floor of the front of the house to match existing, and paint the wooden doors of the enclosure that hides the 3 electric meters to match existingt. (work added to scope of work 4/8/16). Replace one window sash on second floor of dependency with new window sash matched to adjacent. (work added to scope of work 10/20/15)replace one half of a pair of shutters with new shutter matched to adjacent shutter. (work added to scope of work 10/20/15)replace broken joint in dependency gutter/downspout with new copper joint to match existing. Replace two wooden spindles on balcony to match existing and paint to match existing. Repaint shutters and windows to match existing: shuttersgray, semigloss trim including doors, windows, frames, gallery fascia/soffit boardswhite, semigloss all repair/replacement work shall match existing in color, size, material, detail, profile and

Replace the existing beaded tongue and groove paneling on the courtyard gate to match exiting paint to match existing this permit is a reissuance of vcc permit #11-0820

To repoint the brick, bourbon street faade & gov. Nicholls street side elevation as necessary, using the vcc standard soft mortar mix with no more than 1 part portland cement, 3 parts lime, 9 parts sand, enough water to form a workable mix. (prepackaged mixes are not permitted, as quality control is not consistent.) to touch-up paint brick as necessary to match the existing color (pinkish/tan, bm 1207, flat or eggshell finish)

To repoint the brick, bourbon street faade & gov. Nicholls street side elevation as necessary, using the vcc standard soft mortar mix with no more than 1 part portland cement, 3 parts lime, 9 parts sand, enough water to form a workable mix. (prepackaged mixes are not permitted, as quality control is not consistent.) to touch-up paint brick as necessary to match the existing color (pinkish tan, bm 1207, flat or eggshell finish)

Painting both garden gates to match existing, paint garden half wall (with iron work on top) to match existing, paint the ground floor of the front of the house to match existing, and paint the wooden doors of the enclosure that hides the 3 electric meters to match existingt. (work added to scope of work 4 8 16). Replace one window sash on second floor of dependency with new window sash matched to adjacent. (work added to scope of work 10 20 15)replace one half of a pair of shutters with new shutter matched to adjacent shutter. (work added to scope of work 10 20 15)replace broken joint in dependency gutter downspout with new copper joint to match existing. Replace two wooden spindles on balcony to match existing and paint to match existing. Repaint shutters and windows to match existing: shuttersgray, semigloss trim including doors, windows, frames, gallery fascia soffit boardswhite, semigloss all repair replacement work shall match existing in color, size, material, detail, profile and

Reassemble re-attach the wooden balusters and top railing of one section of the dependency balcony. Add "l" shaped metal supports under each railing where it attached to a pillar post. Paint all metal supports to match wood.

Install (1) 2 ton condenser on the roof w (1) 45, btu furnace

To prepare for painting by sanding (rotary sanders cannot be used), making minor millwork and masonry repairs as necessary to match existing conditions (masonry mix must be soft, with maximum portland cement content not to exceed 1 part to 12) and to paint as follows to match existing conditions: walls... Dusty rose color matched to existing walls, flat or satin finish wooden elements including doors, windows, frames, shop windows, fascia soffit outriggers of gallery... Off-white, semigloss shuttersgray, semigloss ironwork ... Grey, semigloss front door thresholdpolyurethane, semigloss all repair replacement work shall match existing in color, size, material, detail, profile and exposure. All work must conform to standard vcc policies & guidelines.

Reassemble re-attach the wooden balusters and top railing of one section of the dependency balcony. Add "l" shaped metal supports under each railing where it attached to a pillar post. Paint all metal supports to match wood.