Conceptual approval of metal gate in existing fence as per vcc permit #15-07776-vcgen.

Conceptual approval of metal gate in existing fence.

Install new 8-0" tall and 3-4" wide pedestrian square picket gate in existing royal street stucco wall of existing parking lot, per drawings stamped vcc approved 09/23/15.

Install new 8-0" tall and 3-4" wide pedestrian square picket gate in existing royal street stucco wall of existing parking lot, per drawings stamped vcc approved 09/23/15.

Install new 8-0" tall and 3-4" wide pedestrian square picket gate in existing royal street stucco wall of existing parking lot, per drawings stamped vcc approved 09 23 15.

Install new 8-0" tall and 3-4" wide pedestrian square picket gate in existing royal street stucco wall of existing parking lot, per drawings stamped vcc approved 09 23 15.

The following work is approved for the upriver elevation of the building:1. Clean stuccoed masonry wall with prosoco 20 cleaner in conjunction with low pressure washing (100psi)2. Cut out deteriorated stucco down to sound substrate. Repair mortar joints as needed to match existing with vcc approved mortar (below). Apply vcc approved stucco formula (below). Stucco to be tooled and scored to match existing adjacent stucco finish. 3. Paint areas of stucco repair as needed to match existing. Mortarno more than 1 part portland cement, 3 parts lime, 9 parts sand, enough water to form a workable mix. Prepackaged mixes are not permitted, as quality control is not consistent. Stuccobase coat- consists of 2 coats, doubled up work of 5/8" total thickness, proportioned as follows:no greater than 1:12 part portland cement, to 3 parts lime, and 9 parts sand, 6 lbs./cubic yard hair or fiber, enough water to form a workable mix. Finish coat- 1/4" in total thickness proportioned as follows:no more than 1

Remove existing asbestos roofing material repair and or replace underlayment as necessary install new 18 x 12 natural slate (grey green), using copper nails install copper step flashing install copper box valley gutter install reinstall ceramic or concrete v-style or terra cotta ridge tiles. Replace broken tiles as needed, to match existing. Metal cap-flashing on the parapets is not allowednote: trash chutes are required for removal of debris from all roofs all work must conform to standard vcc policies & guidelines permit does not allow for cap flashing on parapet or surrounding wallstorch-applied roofing is not permitted in the vieux carr. All repair replacement work shall match existing in color, size, material, detail, profile and exposure. All work must conform to standard vcc policies & guidelines.

The following work is approved for the upriver elevation of the building:1. Clean stuccoed masonry wall with prosoco 20 cleaner in conjunction with low pressure washing (100psi)2. Cut out deteriorated stucco down to sound substrate. Repair mortar joints as needed to match existing with vcc approved mortar (below). Apply vcc approved stucco formula (below). Stucco to be tooled and scored to match existing adjacent stucco finish. 3. Paint areas of stucco repair as needed to match existing. Mortarno more than 1 part portland cement, 3 parts lime, 9 parts sand, enough water to form a workable mix. Prepackaged mixes are not permitted, as quality control is not consistent. Stuccobase coat- consists of 2 coats, doubled up work of 5 8" total thickness, proportioned as follows:no greater than 1:12 part portland cement, to 3 parts lime, and 9 parts sand, 6 lbs. Cubic yard hair or fiber, enough water to form a workable mix. Finish coat- 1 4" in total thickness proportioned as follows:no more than 1