Install cameras & exhaust ventpaint wires to match buildingpaint exhaust vent to match building

1. Remove, replace old glazing on windows and paint work to match the original color. 2. Replace bottom window sill of top window sash on the last window closest to the car gate entry.

Retain existing security cameras and relocate as follows:one (1) mounted to soffit in corner by bracket nearest to burgundyone (1) mounted to soffit in corner by bracket on the rampart side of the main doorpaint security cameras to match adjacent surfaceall conduit and wiring shall be placed along the inside corners of building surfaces as much as possible, such as along gallery/balcony purlins at the deck line, and painted to match the adjacent surfaces. Note: specification sheets unavailable due to the old age of the cameras.

Repair deteriorated windows, including new glazing on windows and paint red to match the original color. Replace bottom rail of top window sash on the last window closest to the car gate entry to match existing

Installation of two (2) security cameras, and new exhaust vent, as per vcc approval. (1001-03 ursulines st and 1109 burgundy st)

Non-structural, exterior repairs to 1109 burgundy st and 1001 ursulines street, as per vcc approval. (fence only)

Non-structural, exterior repairs to 1109 burgundy st and 1001 ursulines street, as per vcc approval. (fence only)

Non-structural, exterior repairs as per vcc approval. Repairs include replace existing spotlight with shielded spotlight, remove security camera, paint shutters and facade with same color, touch up paint as needed.

Non-structural, exterior repairs to 1109 burgundy st and 1001 ursulines street, as per vcc approval.

Retain existing security cameras and relocate as follows:one (1) mounted to soffit in corner by bracket nearest to burgundyone (1) mounted to soffit in corner by bracket on the rampart side of the main doorpaint security cameras to match adjacent surfaceall conduit and wiring shall be placed along the inside corners of building surfaces as much as possible, such as along gallery balcony purlins at the deck line, and painted to match the adjacent surfaces. Note: specification sheets unavailable due to the old age of the cameras.

To resolve existing vcc violations (case number 16-12140), per attached materials stamped vcc approved 03 08 17, as follows:retain existing security cameras, paint to match adjacent surface. Install shields on existing flood lights on burgundy and gov. Nicholls elevations, and paint fixture to match adjacent surface. Retain exhaust vent, paint to match adjacent surface. Retain existing wooden fence in courtyard, modify fence by installing wooden cap per attached drawing. Prime and paint behr "formal maroon" ppu1-14, semigloss. Prepare building for painting by washing using a low water pressure (4 psi max); sanding (rotary sanders cannot be used), making minor millwork and masonry repairs as necessary to match existing conditions (masonry mix must be soft, with maximum portland cement content not to exceed 1 part to 12) and to paint as follows: walls: sherwin williams "st ann street yellow," flat or satin finish window sashes and doors: benjamin moore "segovia red" 1288" semigloss trim: be