QUALITY
ACTIVITY
AVERAGE PROJECT COST
PERMITS VALUATION
PROJECTS PER TOWN:
SERVICES
Get several free quotes from best contractors in your area.
| Content | Date | Cost | Contractor Rank | Address | Contractor |
|---|---|---|---|---|---|
SCORE 59 1794 S Wasatch Dr, Salt Lake City, Ut, 841083366 1. Tear off the old roofing down to the wood deck and haul away. The wood decking will be inspected. 2. Mechanically attach inch gypsum hard board over the wood decking. 3. Nail a glass base sheet to the new insulation. 3. Four plies of type iv fiberglass ply sheet will be solidly mopped to the base sheet with a layer of hot asphalt. Inter-ply mopping of asphalt will be approximately 25 lbs. Per 1 square feet. 4. New 22-gauge color clad gravel stop will be installed at the roof perimeters. The new gravel stop will be stripped in with two plies of the fiberglass felts mopped in a solid layer of hot asphalt. 5. New 24-gauge galvanized metal flashing will be installed on all plumbing pipes and vents that penetrate the roof. 6. Vertical wall surfaces will be flashed with one ply of fiberglass ply sheet and one ply of white granulated modified bitumen flashing sheet embedded in a full mopping of hot asphalt. The top edge of the base flashing will be sealed with plastic cement and fabric. 7.  Date: September 22, 2014 Contractor: Amco American Roofing Conielson Res. ReroofPermit type: Roofing | Permit status: Completed | Completion date: September 22, 2014 | Current use: Residential | Permit id: Bld2014-06880 | |||||
SCORE 59 1794 S Wasatch Dr Salt Lake City, Ut 841083366 1. Tear off the old roofing down to the wood deck and haul away. The wood decking will be inspected. 2. Mechanically attach inch gypsum hard board over the wood decking. 3. Nail a glass base sheet to the new insulation. 3. Four plies of type iv fiberglass ply sheet will be solidly mopped to the base sheet with a layer of hot asphalt. Inter-ply mopping of asphalt will be approximately 25 lbs. Per 1 square feet. 4. New 22-gauge color clad gravel stop will be installed at the roof perimeters. The new gravel stop will be stripped in with two plies of the fiberglass felts mopped in a solid layer of hot asphalt. 5. New 24-gauge galvanized metal flashing will be installed on all plumbing pipes and vents that penetrate the roof. 6. Vertical wall surfaces will be flashed with one ply of fiberglass ply sheet and one ply of white granulated modified bitumen flashing sheet embedded in a full mopping of hot asphalt. The top edge of the base flashing will be sealed with plastic cement and fabric. 7. Date: September 22, 2014Contractor: Amco American Roofing Conielson Res. ReroofPermit type: Roofing | Permit status: Inspections | Completion date: September 22, 2014 | Current use: Residential | Permit id: Bld2014-06880 |
