Remove deteriorated garage door on orleans side of service wing,install new pre-primed, treated plywood garage door, to match existing, per architectural committee approval 12/22/15 and vcc approval 01/07/16. Install new motor and wheels, existing tracks to remain,paint all sides and edges of garage door to match existing,repair, prime and paint stucco to match existing per vcc stucco formula: stucco: base coat consists of 2 coats, doubled up work of 5/8" total thickness. Proportioned as follows: no greater than 1:12 part portland cement, to 3 parts lime, and 9 parts sand, 6 lbs./cubic yard hair or fiber, and enough water to form a workable mix. Finish coat is 1/4" in total thickness proportioned as follows: no more than 1 part portland cement, 3 parts lime, 9 parts sand, enough water to form a workable mix. The resulting mix should range in color from white to beige but should not be grey in color. Note: ratio of portland cement not to exceed 1:12.

Remove existing slate and asbestos roofing material repair and/or replace underlayment as necessaryinstall new natural vermont slate (grey/green), using copper nailsinstall/repair copper gutters, flashing and ventsinstall/reinstall ceramic or concrete v-style or terra cotta ridge tilesmetal cap-flashing on the parapets is not allowednote:trash chutes are required for removal of debris from all roofs. All work must conform to standard vcc policies & guidelines. Permit does not allow for cap flashing on parapet or surrounding walls. Torch-applied roofing is not permitted in the vieux carr. Permit not completed letter sent 2. 6. 15spoke with contractor 2. 12. 15 - will be applying to retain galvanized gutters as there is no run off from copper flashing and paint to match adjacent wall surfaces.

Replace fixed louvred shutters with operable louvred shutters, to match existing in every other way

Remove deteriorated fasciainstall new spanish cedar fascia, 6" in height to match existingpaint... White

Historical import type: enforcement vcc permit paintuser: rpelltracking: 86162714817status: permit issuedstatus date: 1/27/2012 12:00: amowner: 715 dauphine st la, llcowner address: 16885 dallas pkwy, addison, tx 75001owner edited by: 1/27/2012 by rpellto prepare for painting by washing using a low water pressure; sanding (rotary sanders cannot be used); making minormillwork and/or masonry repairs as necessary to match existing conditions (masonry mix must be soft with portland cementcontent not to exceed 1 part to 12); and to paint as follows: wooden elements including doors, white to match existing, semigloss shutters, french quarter green to amtch existing, semigloss

All repair/replacement work shall match existing in color, size, material, detail, profile and exposurerepair and repaint damaged stucco, to match existing, flat or satin finishrepair concrete gallery bases,repair louvered shutters as needed. To prepare for painting by sanding (rotary sanders cannot be used), making minor millwork and masonry repairs as necessary to match existing conditions (masonry mix must be soft, with maximum portland cement content not to exceed 1 part to 12) and to paint as follows:prep and paint underside of gallery and outriggers: white, semiglossprep and paint gallery poles: black. This permit prohibits the application of the following exterior coating materials and paints: sealers, ceramic coatings/paints, elastomeric coatings/paints, waterproofing/water repellent coatings.

To install seven (7) visix 3mp high-definition ip vandal-dome cameras mounted to underside of balconies and balcony soffit per cut sheet & diagram stamped vcc approved 02/19/15. Cameras shall be painted to match adjacent building surface. All conduit and wiring shall be placed along the inside corners of building surfaces as much as possible, such as along gallery/balcony purlins at the deck line, and painted to match the adjacent surfaces.

Repair louvered shutters to match existing in size, material, detail, profile and exposurepaint repairs to match existing... Blue (bm 34-32)replace access control panel on orleans elevation, door frame with similar to existing in size, material, and style in same location

Walls... Silverdrop 790-c2, flat finish wooden elements including doors, windows, frames, shop windows, fascia/soffit/outriggers of gallery, trim... Irish mist 790-c1 or pure white, sw, semigloss shuttersbourbon street blue, sw, semigloss ironwork ... Dark granite 7 f-6, flat

Replace 2 iron gallery support posts

Remove existing slate and asbestos roofing material repair and or replace underlayment as necessaryinstall new natural vermont slate (grey green), using copper nailsinstall repair copper gutters, flashing and ventsinstall reinstall ceramic or concrete v-style or terra cotta ridge tilesmetal cap-flashing on the parapets is not allowednote:trash chutes are required for removal of debris from all roofs. All work must conform to standard vcc policies & guidelines. Permit does not allow for cap flashing on parapet or surrounding walls. Torch-applied roofing is not permitted in the vieux carr. Permit not completed letter sent 2. 6. 15spoke with contractor 2. 12. 15 - will be applying to retain galvanized gutters as there is no run off from copper flashing and paint to match adjacent wall surfaces.

To repair replace two gallery columns damaged by auto accident. All repair replacement work shall match existing in color, size, material, detail, profile and exposure. Failure to exactly match materials, details, profiles, exposures, or vcc mortar as specified in permit will result in a vcc violation and mandated repair of improper work.

To install seven (7) visix 3mp high-definition ip vandal-dome cameras mounted to underside of balconies and balcony soffit per cut sheet & diagram stamped vcc approved 02 19 15. Cameras shall be painted to match adjacent building surface. All conduit and wiring shall be placed along the inside corners of building surfaces as much as possible, such as along gallery balcony purlins at the deck line, and painted to match the adjacent surfaces.

Walls... Silverdrop 790-c2, flat finish wooden elements including doors, windows, frames, shop windows, fascia soffit outriggers of gallery, trim... Irish mist 790-c1 or pure white, sw, semigloss shuttersbourbon street blue, sw, semigloss ironwork ... Dark granite 7 f-6, flat

Historical import type: enforcement vcc permit paintuser: rpelltracking: 86162714817status: permit issuedstatus date: 1 27 2012 12:00: amowner: 715 dauphine st la, llcowner address: 16885 dallas pkwy, addison, tx 75001owner edited by: 1 27 2012 by rpellto prepare for painting by washing using a low water pressure; sanding (rotary sanders cannot be used); making minormillwork and or masonry repairs as necessary to match existing conditions (masonry mix must be soft with portland cementcontent not to exceed 1 part to 12); and to paint as follows: wooden elements including doors, white to match existing, semigloss shutters, french quarter green to amtch existing, semigloss

Remove deteriorated garage door on orleans side of service wing,install new pre-primed, treated plywood garage door, to match existing, per architectural committee approval 12 22 15 and vcc approval 01 07 16. Install new motor and wheels, existing tracks to remain,paint all sides and edges of garage door to match existing,repair, prime and paint stucco to match existing per vcc stucco formula: stucco: base coat consists of 2 coats, doubled up work of 5 8" total thickness. Proportioned as follows: no greater than 1:12 part portland cement, to 3 parts lime, and 9 parts sand, 6 lbs. Cubic yard hair or fiber, and enough water to form a workable mix. Finish coat is 1 4" in total thickness proportioned as follows: no more than 1 part portland cement, 3 parts lime, 9 parts sand, enough water to form a workable mix. The resulting mix should range in color from white to beige but should not be grey in color. Note: ratio of portland cement not to exceed 1:12.

All repair replacement work shall match existing in color, size, material, detail, profile and exposurerepair and repaint damaged stucco, to match existing, flat or satin finishrepair concrete gallery bases,repair louvered shutters as needed. To prepare for painting by sanding (rotary sanders cannot be used), making minor millwork and masonry repairs as necessary to match existing conditions (masonry mix must be soft, with maximum portland cement content not to exceed 1 part to 12) and to paint as follows:prep and paint underside of gallery and outriggers: white, semiglossprep and paint gallery poles: black. This permit prohibits the application of the following exterior coating materials and paints: sealers, ceramic coatings paints, elastomeric coatings paints, waterproofing water repellent coatings.

To make repairs to the roof, flashing, and doors as per scope of worked stamped vcc approved 10 09 17. Work includes but is not limited to: caulking around door trim sealing existing copper downspout applying a mortar cap to top of garden wall behind main building use of harder portland cement permitted for top of wall only; any other masonry repairs to utilize vcc standard recipe note: all work must conform to standard vcc policies & guidelines permit does not allow for cap flashing on parapet or surrounding wallstorch-applied roofing is not permitted in the vieux carr.

Walls... Silverdrop 790-c2, flat finishwooden elements including doors, windows, frames, shop windows, fascia soffit outriggers of gallery, trim... Irish mist 790-c1 or pure white, sw, semiglossshuttersbourbon street blue, sw, semiglossironwork ... Dark granite 7 f-6, flat