Partially rebuild rear wall as per vcc approval.

Repoint bricks on side wall as per vcc approval.

Repoint structurally-sound portion of st. Ann-side dependency wall using vcc mortar formula (attached). Structural crack on n. Rampart st. Ann sides of dependency to be handled separately under structural permit #17-02118. All reinstalled masonry must be properly "toothed in" to existing masonry wall, using vcc mortar formula (attached). Cracked or broken bricks shall be replaced to match existing in color, size, material, porosity, detail, profile and exposure. Failure to exactly match materials, paint color, or vcc mortar as specified in permit will result in a vcc violation and mandated repair of improper work. All mortar to be mixed using the vcc recipe (attached) with a maximum of 1 part portland cement, to 3 parts lime, to 9 parts sand, and enough water to form a workable mix. Prepackaged mixes are not permitted.

Repoint bricks on side wall as per vcc approval.

Remove inappropriate mortar and stucco and rebuild n. Rampart side wall in phases, per materials stamped vcc approved 02 22 17, as follows:install needle shoring in walls (up to two beams per phase)remove all loose, damaged and improper mortar, and repoint using vcc mortar formula. Remove all damaged and improper bricks. Assess interior brick wythe for repair. Rebuild corner base of wall with soft red bricks to match original. Mortar to be of vcc mortar formula as specified in the design guidelines. Remove shoring, patch holes left by shoring, in kind. On first floor, install two (2) coats vcc stucco formula base coat, total thickness 5 8", using no greater than 1:12 portland cement to 3 parts lime, 9 parts sand, and 6 lbs. Cubic yard hair or natural fiber and enough water to form a workable mix. Install vcc stucco formula finish coat, 1 4" thick, with no more than 1 part portland cement to 3 parts lime, 9 parts sand, and enough water to form a workable mix. The resulting mix should range in