Remove inappropriate hard stucco from second and third floors of rear wall of main house. Contact vcc staff for inspection prior to installation of new stucco. Repoint masonry as needed, using vcc mortar formulainstall two (2) coats vcc stucco formula base coat, total thickness 5 8", using no greater than 1:12 portland cement to 3 parts lime, 9 parts sand, and 6 lbs. Cubic yard hair or natural fiber and enough water to form a workable mix. Install vcc stucco formula finish coat, 1 4" thick, with no more than 1 part portland cement to 3 parts lime, 9 parts sand, and enough water to form a workable mix. The resulting mix should range in color from white to beige but should not be grey in color. Remove replace damaged wood trim around windows on third floor, prime and paint to match existing color (white, semigloss)all reinstalled masonry must be properly "toothed in" to existing masonry wall, using vcc mortar formula (attached). Cracked or broken bricks shall be replaced to match existing i