Building Permits at 3 Downing Dr, Asheville, Nc 28704

RECENT PROJECTS

Content	Date	Cost	Contractor Rank	Address	Contractor
Wellington mhp used mh Date: March 15, 2012 Permit status: Closed \| Permit id: 12-01296	2012/03/15	0	95	3 Downing Dr, Asheville, Nc 28704
SCORE 100 Wellington mhp used mh Date: March 15, 2012 Value: $8,000 Contractor: Johnnys M.Hm. Service Of Avl Client: Wellington Mhp Used Mh \| Permit type: Permits - historical \| Permit status: Closed \| Current use: Historical \| Permit id: 12-01296 \| Parcel: 6076	2012/03/15	8000	100	3 Downing Dr, Asheville, Nc 28704	Johnnys M.Hm. Service Of Avl
SCORE 88 Wellington mhp used mh Date: March 15, 2012 Value: $8,000 Contractor: Mountain Top Mobile Mover Client: Wellington Mhp Used Mh \| Permit type: Permits - historical \| Permit status: Closed \| Current use: Historical \| Permit id: 12-01296 \| Parcel: 6076	2012/03/15	8000	88	3 Downing Dr, Asheville, Nc 28704	Mountain Top Mobile Mover
SCORE 100 Wellington mhp used mh Date: March 15, 2012 Value: $8,000 Contractor: Ledford Electric Client: Wellington Mhp Used Mh \| Permit type: Permits - historical \| Permit status: Closed \| Current use: Historical \| Permit id: 12-01296 \| Parcel: 6076	2012/03/15	8000	100	3 Downing Dr, Asheville, Nc 28704	Ledford Electric
March 12, 2012 2:31:03 pm kneel. Wellington mhp used mh - with hp, master zoning approval, 09-6160.; march 15, 2012 11:33:43 am kneel. Received amendment from owner and e-mail from wellington to change setup contractor. Will not be using mechanical permit at this time.; march 15, 2012 2:04:33 pm kneel. Wellington mhp used mh - master zoning approval, 09-6160.; manufacturers installation manual must be on site for inspection. Use manual on pier and anchor strap spacing. If manufacturer set up requires footings, then a footing inspection is necessary prior to placing concrete. First tie down max 2 ft from end of "i" beam, unless manufacturer specs are otherwise. If more than 25% of unit is over 3 above grade tie-downs & pier spacing are to be designed by a engineer. Stairs required at all exist doors. If the top stair is greater than 30" above grade then a handrail is required on both sides of steps. Solid blocks are required if leveling steps is needed. Deck & landing larger than 5 sq Permit type: Permits - historical \| Permit status: Closed \| Permit id: 12-01296 \| Parcel: 6076		0	95	3 Downing Dr, Asheville, Nc 28704
Wellington mhp used mh Date: March 15, 2012 Value: $8,000 Permit type: Historical \| Permit status: Closed \| Permit id: 12-01296	2012/03/15	8000	95	3 Downing Dr, Asheville, Nc 28704
March 12, 2012 2:31:03 pm kneel. Wellington mhp used mh - with hp, master zoning approval, 09-6160.; march 15, 2012 11:33:43 am kneel. Received amendment from owner and e-mail from wellington to change setup contractor. Will not be using mechanical permit at this time.; march 15, 2012 2:04:33 pm kneel. Wellington mhp used mh - master zoning approval, 09-6160.; manufacturers installation manual must be on site for inspection. Use manual on pier and anchor strap spacing. If manufacturer set up requires footings, then a footing inspection is necessary prior to placing concrete. First tie down max 2 ft from end of "i" beam, unless manufacturer specs are otherwise. If more than 25% of unit is over 3 above grade tie-downs & pier spacing are to be designed by a engineer. Stairs required at all exist doors. If the top stair is greater than 30" above grade then a handrail is required on both sides of steps. Solid blocks are required if leveling steps is needed. Deck & landing larger than 5 sq Date: March 15, 2012 Permit type: Permits - historical \| Permit status: Closed \| Permit id: 12-01296 \| Parcel: 6076	2012/03/15	0	95	3 Downing Dr, Asheville, Nc 28704

Building Permits at 3 Downing Dr, Asheville, NC 28704