Replace all 4 lalies columns in the basenment, with new 2"x2"x1 footings dig out existing concrete slab and dirt in order to lower the basement floor 6" lower than the present height. Replace an existing basement window, install a large window with an exterior well. Insulate all the basement ceiling floor joist with fiberglass r30.

Remove and disposal of 75% of the house clapboards/shingle siding, install all new cedar primed clapboards, and all needed red ceder shingles, all new corner, facial, skirt, and windows casings boards. Replace all rotted window siils all around the house. Scrape, caulk, prime and treat the remaining design shingles, the remaining clapboards, the eves, the remaining upper facial boards and moldings. Remove and disposal of front entrance roofing, ceiling playwoods. Remove existing croos beam. Install a pair of 2x12 lvls as a new cross beams (theres no elevation above it), install new roof, install new plywood ceiling boards.

Dig up and pour concrete on the exterior of the left side of the house foundation. Scrape, treat, and paint the interior side of the foundation walls. Frame and insulate all exterior basement walls. Finish basement walls and ceiling, install a basement full bathroom, install basment allure floor panels, redo all basement electrical, prime and paint the whole finished area.

Remove and disposal of 75% of the house clapboards shingle siding, install all new cedar primed clapboards, and all needed red ceder shingles, all new corner, facial, skirt, and windows casings boards. Replace all rotted window siils all around the house. Scrape, caulk, prime and treat the remaining design shingles, the remaining clapboards, the eves, the remaining upper facial boards and moldings. Remove and disposal of front entrance roofing, ceiling playwoods. Remove existing croos beam. Install a pair of 2x12 lvls as a new cross beams (theres no elevation above it), install new roof, install new plywood ceiling boards.

Remove and disposal of front of the house concrete brick landing, and steps. Install 2) 10" x 48" concrete footings, install a new 2x8 pt landing box, install pt 4 steps stringers. Install 2) 4x6 pt support posts, install trex composite as floor boards, azec as new risers boards, install mahogany railings.