ACTIVITY
PERMITS VALUATION
Get several free quotes from best contractors in your area.
| Content | Date | Cost | Contractor Rank | Address | Contractor |
|---|---|---|---|---|---|
Plumbing permit Date: July 17, 2015Client: Laborde Franisco Diane | Permit status: Expired | Permit id: 625634 | |||||
Alteration permit Date: June 10, 2011Client: Laborde Franisco Diane | Permit status: Completed | Permit id: 338417 | |||||
Electrical permit Date: March 16, 2015Client: Laborde Franisco Diane | Permit status: Completed | Permit id: 596202 | |||||
Alteration permit Date: June 10, 2011Client: Laborde Franisco Diane | Permit status: Completed | Permit id: 338417 | |||||
Plumbing permit Date: July 17, 2015Client: Laborde Franisco Diane | Permit status: Expired | Permit id: 625634 | |||||
Electrical permit Date: March 16, 2015Client: Laborde Franisco Diane | Permit status: Completed | Permit id: 596202 | |||||
SCORE 93 Install 5 curb trap and 4" main drain pa1 2015-1972734 - "self-certifications are no longer permitted" - "all excavations and plumbing trenches in excess of 5 feet in depth must have approved shoring in place at the time of inspection" Date: July 17, 2015 Contractor: Wise Guys Construction LlcClient: Laborde Franisco Diane | Permit type: Plumbing permit | Permit status: Expired | Completion date: June 29, 2017 | Permit id: 625634 | |||||
SCORE 89 Replace 6 disconnects and 1-20circuit panel with new due to flood damage as per 2008 nec(south district) Date: March 16, 2015 Contractor: James LazauskasClient: Laborde Franisco Diane | Permit type: Electrical permit | Permit status: Completed | Completion date: October 28, 2015 | Permit id: 596202 | |||||
Stucco second and third floor of corner property. Stucco__exterior plaster. Installation of these materials shall be in compliance withastmc926 andastmc1063 and the provisions of this code. R703. 6. 1 lath. All lath and lath attachments shall be of corrosion- resistant materials. Expanded metal or woven wire lath shall be attached with 11 2-inch-long (38 mm), 11 gage nails having a 7 16-inch (11. 1 mm) head, or 7 8-inch-long (22. 2 mm), 16 gage staples, spaced at no more than 6 inches (152 mm), or as otherwise approved. Date: June 10, 2011Client: Laborde Franisco Diane | Permit type: Alteration permit | Permit status: Completed | Completion date: July 8, 2011 | Permit id: 338417 |