- remove existing brick front wall, 6 square feet. New framing to be structurally fastened to existing party walls and inspected prior to closing. Foundation wall to extend to first floor at 8 inch width. Physically tie in every 4 feet at adjoining wall. New windows and doors must comply with all glazing requirements of the 2009 international energy conservation code. Install capping, flashing and weep holes as per code requirements. R-19 insulation and sheetrock on interior front wall for finish. An inspection of existing wall to be scheduled with inspector before work starts.

Complete re-wire with 100a service.. Receptacles, 15 switches, 5 smoke detectors and 24 hi-hats... In accordance with 2008 nec for a one family building

Install all rough plumbing to connect 1-kitchen sink, 1-laundry tub, 2-toilets, 1-bath tub & 2-vanities (sfd) pa201415502 self-cerifications are no longer permitted - all excavations & plumbing trenches in excess of 5 in depth must have approved shoring in place at the time of inspection

2 story 2"x6", 16"oc wood framed wall in rear. 2"x 10" window and door headers, r-19 insulation in exterior wall cavaties. Tyvek underlayment under 1" stucco with wire mesh.

Install new 75,0 btu 90% furnace and 2 ton a c system new duct work